Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - MPC7500

Pages: 1 ... 32 33 [34] 35 36 ... 41
496
User Zone / Re: Fedora Linux Thread
« on: March 04, 2020, 07:42:17 am »
Which repository have I to enable to get Kernel 5.6?

I currently have a problem with the 8x PCIe slot. There is a NVMe adopter (with Corsair MP600) in this slot and I get the error:
Code: [Select]
nvme nvme0: frozen state error detected, reset. 
Removing after probe failure status: -19.
can't change power state from D3hot to D0 (config space inaccessible)

I guess this could be a kernel problem?
This error only occurs if the 16x slot is used (RX5500XT).

Has anyone an idea how to locate the error?

Edit: Here I found someone with a similar issue.
His conclusion in the last post: Mainboard change to a different model.

497
Firmware / Re: Recovering BMC After Failed Firmware Update
« on: March 03, 2020, 06:23:49 pm »
Sorry, my mistake. If it worked before and now it doesn't, then the problem lies elsewhere. Bus Pirate will do the job.

498
Firmware / Re: Recovering BMC After Failed Firmware Update
« on: March 02, 2020, 07:57:48 pm »
It should also work with the serial adopter on header J7701. If that doesn't work I hardly guess the pinout of the adopter is wrong or you used the wrong USB DB9 cable.

499
Thank you very much. I appreciate that post.

500
Firmware / Re: Recovering BMC After Failed Firmware Update
« on: February 29, 2020, 09:02:12 pm »
At the moment there is someone who has the similar problem.

You are banned

502
Firmware / Re: Recovering BMC After Failed Firmware Update
« on: February 29, 2020, 01:13:43 pm »
If you don't trust the Github source, you could ask JSharp. He has the ASpeed utilities, too.
I assume you're on the Talos IRC, too? aperson678?

503
Firmware / Re: Recovering BMC After Failed Firmware Update
« on: February 28, 2020, 06:18:54 pm »
This error occurs if you forget to decompress the file, AFAIK.

504
Firmware / Re: Recovering BMC After Failed Firmware Update
« on: February 28, 2020, 07:49:49 am »
AFAIK, you could reprogramming through J7701 header with a serial adopter. No ISP programmer needed. I have an ASSMANN AK-610300-003-E.

You already read this guide?
Debricking the BMC

I haven't done this till now.

506
Firmware / Re: New firmware V2.00 BMC procedure
« on: February 24, 2020, 05:05:33 pm »
You know you can take screenshots too? You don't have to take pictures with your cell phone. The easiest thing would be C&P.

507
Blackbird / Re: Support for POWER9 22core?
« on: February 24, 2020, 04:59:10 pm »
Do not forget that datasheet is from 2018, referring to order numbers. And a 02CY644 should work at full speed in a Blackbird, according to this chart.

508
Blackbird / Re: Support for POWER9 22core?
« on: February 19, 2020, 08:58:12 am »
Also on Böackbird you have dual-channel memory, on TalosII quad-channel.

509
Condor / Re: Technical features
« on: February 18, 2020, 06:43:11 pm »
I could imagine the Condor planar is for an IBM Power10 ...

It's for a POWER9 LaGrange CPU.

510
User Zone / Re: Sound card enabling
« on: February 18, 2020, 01:53:44 pm »
A little Google search would have given you a negative.

Pages: 1 ... 32 33 [34] 35 36 ... 41