Messages

1

Mod Zone / Re: Initial findings running on water cooling

« on: Today at 09:25:36 am »

Sounds good. Oh this about Dune Pro I never heard off.

Edit: You could also add the case to the wiki: https://wiki.raptorcs.com/wiki/Talos_II/Hardware_Compatibility_List

2

Mod Zone / Re: Initial findings running on water cooling

« on: Today at 08:40:15 am »

McPrue Apollo ATX:

    https://www.mcprue.com/store

A very expensive, hand-built Mac Pro clone. It's like the Dune case, but it actually shipped and some dude didn't run off with mine and everyone else's money. They're very nicely made but too small for building E-ATX into, at least without the extra work.

That's what I call a real case, even if it is a bit expensive. I would stay away from the Dune Pro case.

3

Mod Zone / Re: Initial findings running on water cooling

« on: March 27, 2023, 02:44:51 pm »

What case is this?

4

Operating Systems and Porting / Re: Tim Pearson added as Debian maintainer

« on: March 26, 2023, 03:07:47 pm »

Yes, it's a good thing.

5

Operating Systems and Porting / Re: Tim Pearson added as Debian maintainer

« on: March 25, 2023, 02:21:49 pm »

Yes. Only because of Chromium. Not such a big deal.

6

General OpenPOWER Discussion / Vikings now offers Blackbirds, too

« on: February 22, 2023, 09:17:40 am »

I noticed yesterday that Vikings now offers Blackbirds, too
https://store.vikings.net/en/blackbird-secure-desktop

Sadly, CPU options disappeared from the store.

7

Blackbird / Re: SATA ports on the fritz?

« on: February 19, 2023, 08:13:29 am »

Only two weeks? Wow!
And everything working now?

8

Blackbird / Re: SATA ports on the fritz?

« on: February 05, 2023, 11:08:46 am »

You're welcome
https://twitter.com/mpc7500v2/status/1622280764027985920

9

Blackbird / Re: SATA ports on the fritz?

« on: February 05, 2023, 08:50:15 am »

You also could give me your ticket number. I could post it on Twitter.

10

GPU Compute / Accelerators / Re: Necessary firmware for Navi14

« on: January 30, 2023, 06:45:55 pm »

This will give the same result. But try it. If you set the jumper you will get a black screen at the beginning and the keyboard will not work, IIRC until the OS is loaded.

AST is connected via HDMI?
AMD via DP?

If yes, boot to petitboot.
Switch to DP.
Press enter

11

Firmware / Re: reset/clear petitboot password?

« on: January 30, 2023, 01:53:20 pm »

This should be the way to go:
https://wiki.raptorcs.com/wiki/Debricking_the_BMC#Reset_persistent_storage

12

GPU Compute / Accelerators / Re: Necessary firmware for Navi14

« on: January 30, 2023, 01:47:12 pm »

Wait. When you're blacklisting the AST GPU you have to switch to the AMD GPU as well.
Means, after you are hitting enter in Petitboot, you have to switch to the port where the AMD GPU is connected, immediately.

Otherwise, the OS don't recognize the AMD GPU.

If you still stay on the AST port after blacklisting this GPU, you will get exactly this picture. It is logical that the Display Manager cannot start then.

13

GPU Compute / Accelerators / Re: Necessary firmware for Navi14

« on: January 29, 2023, 02:11:04 pm »

Weird. Some time ago I tried Leap 15.1 with no issue.

14

GPU Compute / Accelerators / Re: Necessary firmware for Navi14

« on: January 01, 2023, 01:43:57 pm »

@MPC7500 If you blacklist the AST can you interact with Petitboot?

Yes. Blacklisting AST is post-Petitboot.

15

GPU Compute / Accelerators / Re: Necessary firmware for Navi14

« on: December 30, 2022, 09:45:27 pm »

Jumper or blacklist. Blacklistng has some advantages.