Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - MPC7500

Pages: [1] 2 3 ... 39
2
Auto boot and fast reboot are two different things and old kernels don't have the same bugs as new kernels.

3
Blackbird / Re: Availability of P9 hardware post-ISA 3.1 HW launch
« on: April 13, 2024, 07:46:59 am »
Vikings doesn't sell RaptorCS products anymore.

4
GPU Compute / Accelerators / Re: Radeon RDNA3 support?
« on: March 05, 2024, 08:58:29 am »
Indeed. Unfortunately, only 7600s are currently available as dual slot cards. Starts at 280€ (Germany).
Then there are the Pro cards (W7500 - W7800) as single and dual slot. Start at approx. 450€.
However, these are not any faster than the consumer cards.

5
Firmware / Re: Firmware 2.10 for Talos-II and Blackbird available
« on: March 01, 2024, 05:42:55 am »
Has the card worked with the old firmware?

7
General OpenPOWER Discussion / Re: Using Older Radeon Cards On Talos II.
« on: January 30, 2024, 09:16:32 am »
On Petitboot I always use the framebuffer and on the OS I switch to the RDNA1 GPU.

8
General CPU Discussion / Re: Artic Tern and Kestrel developers
« on: January 09, 2024, 06:45:47 pm »
No, you have to stay logged in. As soon as you log out or go offline, you will no longer see older posts.
There are clients like Element (Matrix) that keep you online all the time.

9
General CPU Discussion / Re: Artic Tern and Kestrel developers
« on: January 08, 2024, 08:23:31 pm »
The talos-workstation IRC
https://wiki.raptorcs.com/wiki/IRC

10
Blackbird / Re: Blackbird for sale
« on: December 30, 2023, 12:06:11 pm »
Congrats. Let's hope that the successors appear soon. Or maybe not ;)

11
GPU Compute / Accelerators / Re: Radeon RDNA3 support?
« on: December 22, 2023, 07:45:40 pm »
Yesterday someone on the Talos IRC reported that he runs a RX 7600 successfully on Fedora 39.
I guess, the same kernel requirements as RDNA2 (Kernel 6.1+). Not sure though.

12
Talos II / Re: Talos II reboots itself
« on: December 10, 2023, 06:07:32 am »
It's pretty simple. You only have to update the BMC and the OpenPOWER firmware, not the FPGA.
https://wiki.raptorcs.com/wiki/Updating_Firmware

13
Talos II / Re: Talos II reboots itself
« on: December 07, 2023, 03:50:44 pm »
I had the same problem some time ago. After a thunderstorm with a lightning strike. I had to re-flash the firmware.
It could also indicate a bad PSU, which happens surprisingly often.

14
Blackbird / Re: Need help with troubleshooting failed to boot issue
« on: November 07, 2023, 10:38:21 am »
Have you tried another PSU?
You followed this guide already?
https://wiki.raptorcs.com/wiki/Troubleshooting/Support_Request_Checklist

Edit: This is also useful: https://wiki.raptorcs.com/wiki/Troubleshooting/BMC_Power

15
General OpenPOWER Discussion / Re: POWER11 on the horizon?
« on: October 26, 2023, 09:32:53 am »
To be honest, the MPC74xx was not bad. The only problem was the manufacturing facilities of Motorola/Freescale.

And the MPC86xx was better than the PPC970. It just came a bit too late, unfortunately.
But in the end, Apple got exactly what they paid for.

Pages: [1] 2 3 ... 39