511
User Zone / Re: Fedora Linux Thread
« on: February 10, 2020, 07:10:01 am »
Cool. Thank you very much. I will try it later.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
512
General Discussion / Re: ASUS Hyper M.2 PCI-e X16 V2 Expansion Card and Support for RAID on CPU
« on: February 09, 2020, 07:41:47 pm »
Germany, IIRC?
On Amazon a bestseller
On Amazon a bestseller
513
User Zone / Re: Fedora Linux Thread
« on: February 08, 2020, 11:03:09 am »
Terminal command
I'm aware of IPMItool. Would be nice to have a GNOME shell that uses IPMItool.
Code: [Select]
pkcon refresh force should fix the problem, I think.code]ipmitool sensor[/code] will show you the fan speeds etc. alongside CPU / DIMM / planar temps and power usage.
I'm aware of IPMItool. Would be nice to have a GNOME shell that uses IPMItool.
514
User Zone / Re: Fedora Linux Thread
« on: February 07, 2020, 07:05:00 am »
Your mainboard fans also not shown. Got it. Thanks!
515
User Zone / Re: Fedora Linux Thread
« on: February 06, 2020, 04:41:38 pm »
Is it possible that the kernel module ibmpowernv is not available under Fedora?
I wonder how then ClassicHasClass gets the fan sensors displayed on it?
I wonder how then ClassicHasClass gets the fan sensors displayed on it?
516
Blackbird / Re: [Need guidance] Troubleshooting Readeon Vega 64 graphic card no output on boot
« on: February 05, 2020, 08:47:54 am »
Great. Now the card only has to work at Petitboot?
517
Blackbird / Re: [Need guidance] Troubleshooting Readeon Vega 64 graphic card no output on boot
« on: February 04, 2020, 07:49:00 am »
I don't have a discrete GPU myself, so I couldn't try it. But output will be Petitboot. That's why you need the disable jumper. Otherwise Petitboot will be shown on the AST GPU.
In the firmware directory you need two directories. amdgpu and radeon. Which files do you have in the directories?
But anyway, I would first to get it working under Linux.
Maybe there is someone else who could help.
In the firmware directory you need two directories. amdgpu and radeon. Which files do you have in the directories?
But anyway, I would first to get it working under Linux.
Maybe there is someone else who could help.
518
User Zone / Re: Black screen instead of petitboot menu with AST (no GPU installed)
« on: February 03, 2020, 03:14:25 pm »
About the keyboard, take a look at this thread.
Maybe did you blacklist the AST?
Maybe did you blacklist the AST?
519
User Zone / Re: Black screen instead of petitboot menu with AST (no GPU installed)
« on: February 03, 2020, 02:24:44 pm »
I guess, you tried ssh root@blackbird ?
Ethernet is connected next to the USB ports?
Did you also try to switch off the PSU for two minutes? And then power on again.
Ethernet is connected next to the USB ports?
Did you also try to switch off the PSU for two minutes? And then power on again.
521
Blackbird / Re: [Need guidance] Troubleshooting Readeon Vega 64 graphic card no output on boot
« on: February 03, 2020, 11:51:43 am »
Have you read this wiki entry, already? To get the AMDGPU work under Linux.
522
Blackbird / Re: Regular users issues
« on: February 03, 2020, 10:28:48 am »
Yes. It's written on the Wiki. If you're looking for a one-click solution. There isn't one.
523
User Zone / Re: Configure Xorg for AST2500 max resolution of 1920x1200 on Ubuntu Server 19.10
« on: February 02, 2020, 05:32:48 pm »
Sadly, I can't test myself. But on the RCSwiki you could describe how to get the needed modeline using cvt command, modeline calculator or looking into Xorg.0.log for supported resolutions etc..
524
Operating Systems and Porting / Re: System cleaning
« on: February 02, 2020, 05:18:04 pm »
My guess would have been:
Unused space must be formatted first, then you can resize
What is the size of the whole disk?
Unused space must be formatted first, then you can resize
What is the size of the whole disk?
525
Blackbird / Re: The download location for factory default BOOTKERNFW
« on: February 02, 2020, 10:52:25 am »
And there's AFAIK no performance advantage in doing this. If you have a second computer, you could access the Blackbird via ssh:
Then you could see the hostboot coming up like:
And you could also see Petitboot:
Code: [Select]
ssh root@blackbird -t -p2200Then you could see the hostboot coming up like:
Code: [Select]
--== Welcome to Hostboot hostboot-3beba24/hbicore.bin ==--
3.05524|secure|SecureROM valid - enabling functionality
5.88506|Booting from SBE side 0 on master proc=00050000
5.92409|ISTEP 6. 5 - host_init_fsi
6.45292|ISTEP 6. 6 - host_set_ipl_parms
7.01365|ISTEP 6. 7 - host_discover_targets
…
[ 58.115693949,5] IPMI: Resetting boot count on successful boot
[ 58.115766868,5] INIT: Waiting for kernel...
[ 71.203854371,3] STB: BOOTKERNEL verification FAILED. log=0xffffffffffff8160
[ 71.204413794,5] INIT: 64-bit LE kernel discovered
[ 71.352697029,5] INIT: Starting kernel at 0x20011000, fdt at 0x306f35a0 206892 bytes
[ 73.036164478,3] LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010080
[ 73.036176803,6] IPMI: dropping non severe PEL event
[ 73.036252854,7] UART: IRQ functional !And you could also see Petitboot:
