Author Topic: Fedora Linux Thread  (Read 15161 times)

MPC7500

  • Hero Member
  • *****
  • Posts: 572
  • Karma: +40/-1
    • View Profile
    • Twitter
Re: Fedora Linux Thread
« Reply #30 on: January 31, 2020, 11:11:35 am »
Is there any way to enable a suspend-mode in Fedora? Because, when I press the suspend button I get a black screen. Power consumption drops from 54W to 51W. My guess, only the AST is suspended? Then I couldn't wake up the computer again.

I have also read:
Quote
Unlike the previous architecture of the POWER8 processor, POWER9 processor only supports one instruction to enter idle state. POWER ISA (Instruction Set Architecture) has been revised to remove legacy idle state instructions (nap, sleep, winkle). A new instruction, 'stop', has been added for this purpose to the ISA.

An Overview of Idle States in the POWER9 Processor

ClassicHasClass

  • Sr. Member
  • ****
  • Posts: 443
  • Karma: +34/-0
  • Talospace Earth Orbit
    • View Profile
    • Floodgap
Re: Fedora Linux Thread
« Reply #31 on: January 31, 2020, 07:50:32 pm »
Not that I'm aware of, or at least it doesn't seem to make any difference.

FlyingBlackbird

  • Full Member
  • ***
  • Posts: 102
  • Karma: +3/-0
    • View Profile
Re: Fedora Linux Thread
« Reply #32 on: February 01, 2020, 04:15:53 am »
Is there any way to enable a suspend-mode in Fedora? Because, when I press the suspend button I get a black screen. Power consumption drops from 54W to 51W. My guess, only the AST is suspended? Then I couldn't wake up the computer again.

I have exactly the same problem on Ubuntu 19.10 (and Fedora 31 as well) - also with almost no reduction of power consumption and a dead black screen - and seen no solution so far...

MPC7500

  • Hero Member
  • *****
  • Posts: 572
  • Karma: +40/-1
    • View Profile
    • Twitter
Re: Fedora Linux Thread
« Reply #33 on: February 06, 2020, 04:41:38 pm »
Is it possible that the kernel module ibmpowernv is not available under Fedora?
I wonder how then ClassicHasClass gets the fan sensors displayed on it?

ClassicHasClass

  • Sr. Member
  • ****
  • Posts: 443
  • Karma: +34/-0
  • Talospace Earth Orbit
    • View Profile
    • Floodgap
Re: Fedora Linux Thread
« Reply #34 on: February 06, 2020, 10:25:13 pm »
Code: [Select]
% sudo dnf install lm_sensors
Last metadata expiration check: 0:00:12 ago on Thu 06 Feb 2020 08:23:56 PM PST.
Package lm_sensors-3.5.0-6.fc31.ppc64le is already installed.
Dependencies resolved.
Nothing to do.
Complete!
% sensors
ibmpowernv-isa-0000
Adapter: ISA adapter
Chip 0 Vdd Remote Sense:  +1.00 V  (lowest =  +0.67 V, highest =  +1.01 V)
Chip 0 Vdn Remote Sense:  +0.72 V  (lowest =  +0.72 V, highest =  +0.72 V)
Chip 8 Vdd Remote Sense:  +0.93 V  (lowest =  +0.63 V, highest =  +0.94 V)
Chip 8 Vdn Remote Sense:  +0.69 V  (lowest =  +0.69 V, highest =  +0.69 V)
Chip 0 Vdd:               +1.01 V  (lowest =  +0.68 V, highest =  +1.01 V)
Chip 0 Vdn:               +0.72 V  (lowest =  +0.72 V, highest =  +0.72 V)
Chip 8 Vdd:               +0.94 V  (lowest =  +0.64 V, highest =  +0.94 V)
Chip 8 Vdn:               +0.69 V  (lowest =  +0.69 V, highest =  +0.69 V)
Chip 0 Core 0:            +56.0°C  (lowest =  +7.0°C, highest = +80.0°C)
Chip 0 Core 4:            +65.0°C  (lowest =  +6.0°C, highest = +80.0°C)
Chip 0 Core 8:            +55.0°C  (lowest =  +8.0°C, highest = +82.0°C)
Chip 0 Core 12:           +55.0°C  (lowest =  +8.0°C, highest = +80.0°C)
Chip 8 Core 16:           +50.0°C  (lowest = +21.0°C, highest = +65.0°C)
Chip 8 Core 20:           +43.0°C  (lowest = +22.0°C, highest = +65.0°C)
Chip 8 Core 24:           +43.0°C  (lowest = +22.0°C, highest = +67.0°C)
Chip 8 Core 28:           +43.0°C  (lowest =  +5.0°C, highest = +81.0°C)
Chip 0 DIMM 0 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 0 DIMM 1 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 0 DIMM 2 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 0 DIMM 3 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 0 DIMM 4 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 0 DIMM 5 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 0 DIMM 6 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 0 DIMM 7 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 0 DIMM 8 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 0 DIMM 9 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 0 DIMM 10 :           +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 0 DIMM 11 :           +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 0 DIMM 12 :           +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 0 DIMM 13 :           +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 0 DIMM 14 :          +47.0°C  (lowest = +32.0°C, highest = +56.0°C)
Chip 0 DIMM 15 :           +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 8 DIMM 0 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 8 DIMM 1 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 8 DIMM 2 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 8 DIMM 3 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 8 DIMM 4 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 8 DIMM 5 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 8 DIMM 6 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 8 DIMM 7 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 8 DIMM 8 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 8 DIMM 9 :            +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 8 DIMM 10 :           +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 8 DIMM 11 :           +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 8 DIMM 12 :           +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 8 DIMM 13 :           +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 8 DIMM 14 :          +33.0°C  (lowest = +25.0°C, highest = +42.0°C)
Chip 8 DIMM 15 :           +0.0°C  (lowest =  +0.0°C, highest =  +0.0°C)
Chip 0 Nest:              +55.0°C  (lowest = +24.0°C, highest = +61.0°C)
Chip 8 Nest:              +43.0°C  (lowest = +22.0°C, highest = +59.0°C)
Chip 0 VRM VDD:           +50.0°C  (lowest = +33.0°C, highest = +57.0°C)
Chip 8 VRM VDD:           +36.0°C  (lowest = +27.0°C, highest = +47.0°C)
Chip 0 :                  38.00 W  (lowest =  26.00 W, highest =  75.00 W)
Chip 0 Vdd:               11.00 W  (lowest =   0.00 W, highest =  47.00 W)
Chip 0 Vdn:                8.00 W  (lowest =   7.00 W, highest =   9.00 W)
Chip 8 :                  41.00 W  (lowest =  27.00 W, highest =  75.00 W)
Chip 8 Vdd:               14.00 W  (lowest =   0.00 W, highest =  47.00 W)
Chip 8 Vdn:                8.00 W  (lowest =   7.00 W, highest =  10.00 W)
Chip 0 :                  49.47 MJ
Chip 0 Vdd:                7.41 MJ
Chip 0 Vdn:               15.00 MJ
Chip 8 :                  65.08 MJ
Chip 8 Vdd:               13.89 MJ
Chip 8 Vdn:               15.18 MJ
Chip 0 Vdd:              +11.13 A  (lowest =  +0.13 A, highest = +48.13 A)
Chip 0 Vdn:              +12.13 A  (lowest = +10.38 A, highest = +13.75 A)
Chip 8 Vdd:              +16.13 A  (lowest =  +0.63 A, highest = +50.88 A)
Chip 8 Vdn:              +12.75 A  (lowest = +11.25 A, highest = +15.50 A)

amdgpu-pci-0100
Adapter: PCI adapter
vddgfx:       +0.95 V 
fan1:        1215 RPM  (min =  700 RPM, max = 4500 RPM)
edge:         +57.0°C  (crit = +99.0°C, hyst = -273.1°C)
power1:       20.17 W  (cap =  95.00 W)

MPC7500

  • Hero Member
  • *****
  • Posts: 572
  • Karma: +40/-1
    • View Profile
    • Twitter
Re: Fedora Linux Thread
« Reply #35 on: February 07, 2020, 07:05:00 am »
Your mainboard fans also not shown. Got it. Thanks!

ClassicHasClass

  • Sr. Member
  • ****
  • Posts: 443
  • Karma: +34/-0
  • Talospace Earth Orbit
    • View Profile
    • Floodgap
Re: Fedora Linux Thread
« Reply #36 on: February 07, 2020, 10:31:18 pm »
Yeah, it's just the video card. Same for the Blackbird (that was done on this T2).

madscientist159

  • Raptor Staff
  • *****
  • Posts: 47
  • Karma: +11/-0
    • View Profile
Re: Fedora Linux Thread
« Reply #37 on: February 07, 2020, 11:29:45 pm »
Your mainboard fans also not shown. Got it. Thanks!

Code: [Select]
ipmitool sensor will show you the fan speeds etc. alongside CPU / DIMM / planar temps and power usage.

MauryG5

  • Hero Member
  • *****
  • Posts: 729
  • Karma: +22/-1
    • View Profile
Re: Fedora Linux Thread
« Reply #38 on: February 08, 2020, 04:31:39 am »
Hi guys, I don't know if you have noticed but I think so now, after the latest Fedora updates, a nice bug has come out in the application that manages the software, the Fedora software market. It no longer displays the images of the applications and what is worse no longer lets you manage them, by selecting updates or installed, the wait turns endlessly ... Has someone managed to report this anomaly by chance already?

MPC7500

  • Hero Member
  • *****
  • Posts: 572
  • Karma: +40/-1
    • View Profile
    • Twitter
Re: Fedora Linux Thread
« Reply #39 on: February 08, 2020, 11:03:09 am »
Terminal command
Code: [Select]
pkcon refresh force should fix the problem, I think.

code]ipmitool sensor[/code] will show you the fan speeds etc. alongside CPU / DIMM / planar temps and power usage.

I'm aware of IPMItool. Would be nice to have a GNOME shell that uses IPMItool.

MauryG5

  • Hero Member
  • *****
  • Posts: 729
  • Karma: +22/-1
    • View Profile
Re: Fedora Linux Thread
« Reply #40 on: February 08, 2020, 02:18:11 pm »
tried a little while ago but unfortunately nothing, the problem persists, I think we should report it to the Fedora team as there is a bug in the last update ... I don't know how to do it if someone can report it to him it would be a very good thing ... Thanks always for the help, thanks MPC always great and always very active in the Power community!

ClassicHasClass

  • Sr. Member
  • ****
  • Posts: 443
  • Karma: +34/-0
  • Talospace Earth Orbit
    • View Profile
    • Floodgap
Re: Fedora Linux Thread
« Reply #41 on: February 08, 2020, 03:42:14 pm »
I'm aware of IPMItool. Would be nice to have a GNOME shell that uses IPMItool.

Sounds like I have a project for the weekend ...

ClassicHasClass

  • Sr. Member
  • ****
  • Posts: 443
  • Karma: +34/-0
  • Talospace Earth Orbit
    • View Profile
    • Floodgap
Re: Fedora Linux Thread
« Reply #42 on: February 09, 2020, 11:15:35 pm »
Well, that didn't take too long, even though I've been on duty all weekend.

https://www.talospace.com/2020/02/diy-ipmi-fans.html

MPC7500

  • Hero Member
  • *****
  • Posts: 572
  • Karma: +40/-1
    • View Profile
    • Twitter
Re: Fedora Linux Thread
« Reply #43 on: February 10, 2020, 07:10:01 am »
Cool. Thank you very much. I will try it later.

MPC7500

  • Hero Member
  • *****
  • Posts: 572
  • Karma: +40/-1
    • View Profile
    • Twitter
Re: Fedora Linux Thread
« Reply #44 on: February 12, 2020, 12:55:47 pm »
Sorry, I have to ask you one thing. I have done adduser and addgroup. The files looks as folows:

vigr:
Code: [Select]
ipmi:x:1001:username
vigr -s:
Code: [Select]
ipmi:!::username
vipw:
Code: [Select]
username:x:1000:1001:ipmi:/home/username:/bin/bash
groups:
Code: [Select]
ipmi wheel
I guess, the vipw entry are wrong? What have I got to enter in this file?

Because, when I type: ipmitool sdr type fan, I got:
Code: [Select]
Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory
I still have to sudo.