Author Topic: Sound card enabling  (Read 11927 times)

MauryG5

  • Hero Member
  • *****
  • Posts: 760
  • Karma: +22/-1
    • View Profile
Re: Sound card enabling
« Reply #15 on: February 18, 2020, 02:39:15 pm »
In any case, there is now and will be used or sooner or later, you just have to wait for the moment they decide to write the drivers for Linux ... It takes a little patience ...

MauryG5

  • Hero Member
  • *****
  • Posts: 760
  • Karma: +22/-1
    • View Profile
Re: RME Sound card enabling
« Reply #16 on: March 30, 2020, 04:28:03 pm »
Hi everyone, unfortunately, currently unable to use Creative's excellent Sound Blaster AE-9, for lack of drivers, I was turning my attention to a sound card that the Wiki guide says to be working on Power or the RME HDSPe AIO . Does anyone know how to make it work and where to find any drivers that are needed to make it work properly on our Power systems? Thanks

MPC7500

  • Hero Member
  • *****
  • Posts: 587
  • Karma: +41/-1
    • View Profile
    • Twitter
Re: Sound card enabling
« Reply #17 on: March 31, 2020, 07:24:18 am »

MauryG5

  • Hero Member
  • *****
  • Posts: 760
  • Karma: +22/-1
    • View Profile
Re: Sound card enabling
« Reply #18 on: March 31, 2020, 07:32:53 am »
you want to tell me that it is enough to install the card and with Alsa that is already supplied by default on Linux I can make the card work without the need for specific additional drivers ??

MPC7500

  • Hero Member
  • *****
  • Posts: 587
  • Karma: +41/-1
    • View Profile
    • Twitter
Re: Sound card enabling
« Reply #19 on: March 31, 2020, 12:44:48 pm »
Q: Why does Sound Blaster AE-9 not work under Linux?
A: Because it is not supported by ALSA.

This means if you select a sound card that is supported by ALSA, it will obviously work under Linux ...

MauryG5

  • Hero Member
  • *****
  • Posts: 760
  • Karma: +22/-1
    • View Profile
Re: Sound card enabling
« Reply #20 on: March 31, 2020, 01:35:45 pm »
Yes, this I understood on AE-9, so you mean I have to check in Alsa's list if there is the RME mentioned in the wiki. Well thanks for the information I check Alsa's list and see if I find it ... thanks

MauryG5

  • Hero Member
  • *****
  • Posts: 760
  • Karma: +22/-1
    • View Profile
Re: Sound card enabling RME HDSPe AIO
« Reply #21 on: March 31, 2020, 03:23:15 pm »
So I did a search on the internet but the doubts remained. In the list of cards supported by Alsa, the RME HDSPe AIO is not listed. I then looked for information in other forums and some say it works well even if there is no support for additional cards but the AIO works well for them. Another thing that is not clear to me and what does that freeBSD reported on Wiki mean for this card, I don't think it refers to the Unix derived operating system called freeBSD because I don't think it makes sense. Moral of the story I'm not understanding if this card works on Linux or not ... :-\

MauryG5

  • Hero Member
  • *****
  • Posts: 760
  • Karma: +22/-1
    • View Profile
Re: Sound card enabling RME HDSPe AIO
« Reply #22 on: April 03, 2020, 03:22:46 pm »
Hi Raptor, I managed to get the information I was looking for, I joined a forum called LinuxMusicians, in which I found a very nice user who gave me all the information I needed. He told me that the RME HDSPe AIO works well under Linux and that even if it costs a bit, I won't regret it. He told me that Alsa support started years ago, support has been present in the kernel for years now. I had Alsa-Tools installed which I found in a version 1.2.2.1 and then the Alsa firmware dedicated to RME cards. Now I should be ready to use this Sound Card, I just ordered it and I hope it arrives in normal times given the emergency COVID-19 ... Thanks for the information, I will write on the forum to give news of how it goes this beautiful sound card. See you soon and hold on that the Power community needs you in the first place! We must overcome the crisis! If there is something we can do to help you don't exist to ask, the Power community is all with you!