Software > User Zone
Graphics Card install
MauryG5:
MPC I managed to understand the problem of the error that the "make oldconfig" command gave me, I lacked 2 commands one was "bison" the other I don't remember exactly at the moment in any case I installed them both, I installed openssl devel as you told me to do and at that point the make -j 'nproc' command worked and the computer started a lot of kernel building work. Finally I ran the final installation commands and apparently managed to complete everything. Thanks again for your guidance. I just have to understand that activating it via x11, if someone can better explain how to do it, I would be grateful, I am one step away. I have to keep both video outputs because I work with 3 hard drives and 3 operating systems and I always have to select the boot from the petit boot which obviously still works with the integrated video. I need to understand how to activate NAVI 10 and keep the GPU integrated. Unfortunately I don't understand much in the current guide.
MauryG5:
MPC looks at this, I did all the final steps, it doesn't give me errors but when checking the kernel version it still gives me 5.3.16 ... Where do you think the error is? I guess I didn't understand maybe how to do the last steps ...
MauryG5:
so guys, I tried to understand how to activate this graphics card through Xorg, meanwhile I learned that on Fedora there is no Xorg file like on Ubuntu or Debian and that therefore it must be created manually. I used gedit and modified everything to look like this. Now before saving I would like to understand if it is composed correctly or I have to modify something. Above I also posted the result of the grep command in such a way as to make you account for the data that are available to compose this Xorg file ... What do you think? What should be changed in case to be sure it works?
kmarek:
Woah... RSS stopped working so I fell behind.
I made packages for the kernel with the patches already applied to make this easy.
While there's no reason to trust me, I tried to make it clean and reproducible.
Original fedora kernel source RPM: https://kojipkgs.fedoraproject.org/packages/kernel/5.4.0/2.fc32/src/kernel-5.4.0-2.fc32.src.rpm
My modified source RPM: https://files.gigabyteproductions.net/srv/devel/linux-navi10/fedora/f32/try6/kernel-5.4.0-2.fc32.ppc64le/kernel-5.4.0-2.fc32.src.rpm
You can rebuild using rpmbuild, or Mock.
See: https://wiki.centos.org/HowTos/RebuildSRPM
See: https://fedoramagazine.org/how-rpm-packages-are-made-the-source-rpm/
See: https://blog.packagecloud.io/eng/2015/05/11/building-rpm-packages-with-mock/#building-an-rpm-with-mock
My pre-built package can be installed like:
--- Code: ---sudo dnf install \
'https://files.gigabyteproductions.net/srv/devel/linux-navi10/fedora/f32/try6/kernel-5.4.0-2.fc32.ppc64le/kernel-5.4.0-2.fc32.ppc64le.rpm' \
'https://files.gigabyteproductions.net/srv/devel/linux-navi10/fedora/f32/try6/kernel-5.4.0-2.fc32.ppc64le/kernel-core-5.4.0-2.fc32.ppc64le.rpm' \
'https://files.gigabyteproductions.net/srv/devel/linux-navi10/fedora/f32/try6/kernel-5.4.0-2.fc32.ppc64le/kernel-modules-5.4.0-2.fc32.ppc64le.rpm' \
'https://files.gigabyteproductions.net/srv/devel/linux-navi10/fedora/f32/try6/kernel-5.4.0-2.fc32.ppc64le/kernel-modules-extra-5.4.0-2.fc32.ppc64le.rpm' \
;
--- End code ---
MauryG5:
wow congratulations to you you have done a great job. But listen to a question, what difference is there in your opinion between yours and the one already made published by Merklot on the previous pages, he has both published his with the various steps, and the one already made that you can download from the site and install. ..
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version