Software > User Zone
Graphics Card install
kmarek:
They're similar. Both are using Fedora's kernel sources (but mine from 2019-12-05). Packages are easier to reproduce and clean up. Package sources contain their own build steps and list of dependencies.
MauryG5:
Understdood, in any case I installed what Merklot posted, then i'm also trying complete the session of the guide that always posted Merklot to male the Kernel modification by yourself. After all the procedure it still gives me the 5.3.16 Kernel and it's strange because It seems that everything is going we'll, I don't understand why I don't see it in the neofetch command, the modified kernel. In any case I have problems configuring starting the GPU, i'm also asking Raptor why It doesn't work as soon as I insert the configuration file xorg.conf The system hangs and I have to reboot in server mode to remove It... I don't understand... The file is this:
MPC7500:
Compare your output of
--- Code: ---lspci | grep VGA
--- End code ---
with the lines of the created file.These must be identical.
--- Quote ---Note the numbers to the left of the "VGA compatible controller" string. Each of these numbers is the PCI d:B:D.F[note 1] number of the GPU, and is unique to the slot(s) you have your GPU(s) installed in. As a result of this slot dependence, bus IDs may differ from those shown in this example; always use your bus IDs when following the steps below. This slot dependence means that if you move your GPU to a different slot you will need to update the bus ID associated with that GPU.
--- End quote ---
Locate Bus Numbers
MauryG5:
Hi MPC, happy new year to you and to the whole forum, I have already done what the guide says, as you see above I have reported what the guide says and I showed it to Raptor as well, the problem is which doesn't work unfortunately ... Even if I try to configure the graphical modes, it goes into lockout on restart. I don't know why but there is a problem with the Xorg files, it doesn't read them to me, I sent my Xorg.log.0 file to Raptor to see if they can understand what problem I have ... Listen about do you think the kernel because after the procedure I can't see version 5.5.1 as you and the others see it? It seems that everything went well and yet if I do neofetch it tells me that I still have Kernel 5.3.16 ... Do you have any idea what is missing?
MauryG5:
guys I finally solved everything, a special thanks to the friend MPC for his very precious help, he says no but he is much ahead of me with Linux and it shows. Great MPC, thank you all! As a kernel I am using the one posted by Merklot ready and it seems that it works well ...
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version