Author Topic: Blackbird User Guide: Wrong TPM connector and 'missing' USB 2.0 port  (Read 110 times)

Sprocki

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Hello out there,

1) Did anyone ever notice that the user guide on page 22/23 points the same connector J10105 to the "Trusted Platform Module Connector" that on page 30/31 is named the 'USB 3.0 Header Connector'?  Both marks, the arrow and the rectangle on p. 22 are wrong. They should point to the 20-pin header left below the PCIe x8 slot.


2) Does the Blackbird have a USB2 connector onboard or not? According to https://www.raptorcs.com/content/BK1B02/intro.html the Blackbird has an internal USB 2.0 header but this one is not mentioned in the https://wiki.raptorcs.com/wiki/File:C1P9S01_users_guide_version_1_0.pdf. So better remove it from the homepage because this info is misleading.


Interesting side note: the PDF in https://wiki.raptorcs.com/wiki/File:C1P9S01_users_guide_version_1_0.pdf does not mention the name 'Blackbird' a single time.

MPC7500

  • Sr. Member
  • ****
  • Posts: 283
  • Karma: +16/-1
    • View Profile
    • Twitter
Re: Blackbird User Guide: Wrong TPM connector and 'missing' USB 2.0 port
« Reply #1 on: November 03, 2020, 05:35:07 pm »
These are already listed here. The USB-A port is located next to the PCIe 8x slot, sadly.