Raptor Computing Systems Community Forums (BETA)

Software => User Zone => Topic started by: Sprocki on November 03, 2020, 03:58:55 pm

Title: Blackbird User Guide: Wrong TPM connector and 'missing' USB 2.0 port
Post by: Sprocki on November 03, 2020, 03:58:55 pm
Hello out there,

1) Did anyone ever notice that the user guide on page 22/23 points the same connector J10105 to the "Trusted Platform Module Connector" that on page 30/31 is named the 'USB 3.0 Header Connector'?  Both marks, the arrow and the rectangle on p. 22 are wrong. They should point to the 20-pin header left below the PCIe x8 slot.


2) Does the Blackbird have a USB2 connector onboard or not? According to https://www.raptorcs.com/content/BK1B02/intro.html the Blackbird has an internal USB 2.0 header but this one is not mentioned in the https://wiki.raptorcs.com/wiki/File:C1P9S01_users_guide_version_1_0.pdf. So better remove it from the homepage because this info is misleading.


Interesting side note: the PDF in https://wiki.raptorcs.com/wiki/File:C1P9S01_users_guide_version_1_0.pdf does not mention the name 'Blackbird' a single time.
Title: Re: Blackbird User Guide: Wrong TPM connector and 'missing' USB 2.0 port
Post by: MPC7500 on November 03, 2020, 05:35:07 pm
These are already listed here (https://wiki.raptorcs.com/wiki/Errata_and_Improvements). The USB-A port is located next to the PCIe 8x slot, sadly.