Author Topic: Updating firmware from the live host: possible?  (Read 4216 times)

Borley

  • Full Member
  • ***
  • Posts: 174
  • Karma: +15/-0
    • View Profile
Updating firmware from the live host: possible?
« on: July 04, 2020, 04:36:43 pm »
I'm still trying to wrap my head around the 1.00 > 2.00 firmware update procedure.

It looks like the files need to be sent from another computer. Can this be done simply by wiring ethernet ports 0 or 1 directly to the BMC ethernet port?

I would rather avoid having to trust another computer in the process, if at all possible.

ClassicHasClass

  • Sr. Member
  • ****
  • Posts: 462
  • Karma: +35/-0
  • Talospace Earth Orbit
    • View Profile
    • Floodgap
Re: Updating firmware from the live host: possible?
« Reply #1 on: July 06, 2020, 11:07:42 pm »
I guess you could loop it back with the Ethernet ports, but I think a less technically disgusting way would be a USB serial port connected to the BMC headers on the board, and upload things via serial.

Borley

  • Full Member
  • ***
  • Posts: 174
  • Karma: +15/-0
    • View Profile
Re: Updating firmware from the live host: possible?
« Reply #2 on: April 17, 2022, 10:35:27 am »
Some reading up would have clarified this:

Quote
Note that you cannot access the BMC in any way from the host system over network -- the NCSI interface has no support for this, and all access including pings will fail.

Anyway, I have gotten it upgraded a few months ago, the proper way.