News:

RCS Forums now online!

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - isengaara

#1
Blackbird / Re: Alternative processor for Blackbird
October 17, 2026, 04:11:18 AM
Oct 17 08:47:12 blackbird occ-active.sh[1536]: Found 1 CPU(s)
Oct 17 08:47:12 blackbird systemd[1]: phosphor-watchdog@poweron.service: Main process exited, code=killed, status=15/TERM
Oct 17 08:47:12 blackbird systemd[1]: phosphor-watchdog@poweron.service: Succeeded.
Oct 17 08:47:12 blackbird systemd[1]: Stopped Phosphor poweron watchdog.
Oct 17 08:47:13 blackbird systemd[1]: phosphor-gpio-monitor@checkstop.service: Main process exited, code=killed, status=15/TERM
Oct 17 08:47:13 blackbird systemd[1]: phosphor-gpio-monitor@checkstop.service: Succeeded.
Oct 17 08:47:13 blackbird systemd[1]: Stopped Phosphor GPIO checkstop monitor.
Oct 17 08:47:13 blackbird systemd[1]: Started Assert power_on LED.

This looks like a software problem (more precisely a race condition)
#2
I solved the password problem using the serial cable and now can login again.
But I still get the ERROR PowerControl: Pgood poll timeout thing even if I know the powersuppy is good.
The blackbird IPLed once with that PowerSupply and a tester also shows the PSU is good.
#3
Hello again,

I also wrote to support@raptorcs.com and did not get a reply yet. The problem with my Blackbird is as follows. When I press the power button it turns off after a few seconds and only boots sometimes. So I suspect a Heisenbug in the BMC software. I had the same problem one month ago and the reply from
support@raptorcs.com was, that I sould try a different PSU. With this PSU I had no problems for one month. Then on October 8th, my Blackbird stopped working again and using a different PSU did not help. Except that once I was able to IPL the Blackbird again, but it turned off after the IPL was complete at the petitboot prompt. Since I guess that a hardware damage is unlikely I tried to recover my Blackbird using this tutorial: https://vivapowerpc.eu/20260608-1200_How_to_revive_a_mockingbird I deleted all files in /run/initramfs/rw and now I cannot login into the BMC anymore. I had a similar problem with
my Talos II many years ago where an BMC upgrade failed. I was able to recover my machine with a serial cable.

Tobias (they/them)
#4
https://isengaara.de/u/isengaara/m/raubvogel-computer-der-schwarze-vogel-1/
https://isengaara.de/u/isengaara/m/raubvogel-computer-der-schwarze-vogel-2/

Still have to buy SATA-cables and 4-pin ARBG fans for the Blackbird
To control the ARGB LEDs I plan to use a custom RP2040 board.
#5
How do I configure my ThinkPad X200 running Debian that it trusts the https certificate of my BlackBirds BMC? I get the following warning:
rehash: warning: skipping blackbird.pem, it does not contain exactly one certificate or CRL
#6
I completed assembling my system and everything is working perfectly. Except the two front panel LEDs, only one of them lights up when the chassis power is turned off.
Soon I will buy some SATA cables and 4-pin ARGB fans for the case. Unfortunately the included fans are 3-pin, which will always spin up at full speed.
#7
Talos II / Re: Thinking of selling my Talos II System
August 04, 2026, 02:49:03 PM
Sold
#8
I recently began porting Overte to ppc64le. Since Overte depends on Qt WebEngine, I decided that I should also start porting Qt WebEngine to ppc64le (and maybe also big endian ppc), so I am looking for co-maintainers. Maybe on the weekend I will update my blog post for the project.
#9
I am posting my proposal to port Fayalite to the OrangeCrab and later Arctic Tern FPGA boards. I have used the OrangeCrab to run Microwatt (with Linux and Micropython) with a maze-game written by
Jacob Lifshay some years ago. Now I am part of the Libre-Chip project and also doing my own hardware projects using KiCad.




#10
Good. In Summer there are some weeks where I am on vacation, please DM me.
#11
Talos II / Thinking of selling my Talos II System
May 14, 2026, 06:08:36 AM
I have a full Talos II (eary bird, Blackbird and Talos™ II Lite did not exist back then) that I baught for a quite cheap price.
Since I do not plan to add a second POWER9 CPU and a Blackbird with SATA and HDMI is better for my use case, I now think of selling my Talos II.

My system uses a SuperMicro SC732i-500B, a first generation 4-core IBM POWER9 CPU and has 16GB of RAM.
I live in Germany and accept cash payments in Euro. I also have a bank account that supports US Dollar.
#12
Legacy POWER Hardware / Will it run DOOM?
October 17, 2025, 11:51:56 AM
A few month ago I realized that both Nintendo GameCube and iCE40 FPGA can run DOOM. In both cases this is software rendering without any GPU. But there are also some GPU designs that run on Lattice FPGAs including RasteriCEr and RasterIX. In the last few years I have been working on OpenPOWER Microwatt and got a Maze game running. Many years ago at a LAN-party I played the Nintendo WII, a gaming console with DRM that has been cracked, thanks to its GameCube mode. After I found about the PicoBoot IPL replacement, I decided that I should make homebrew games for old BigEndian PowerPC hardware, using devkit-ppc and buildroot. Doing a port of DOOM for 32 bit PowerPC should be easy. Theoretically this could run on any computer with an IBM CPU, starting from the GameCube up to the Talos II. Since I am interested in implementing a GPU on the Arctic Tern (with dual HDMI later), I will also do a port of DOOM to Microwatt first. I also have an OrangeCrab where I can test my FPGA designs, before I buy an Arctic Tern. For a different project, I am currently designing my own iCE40 FPGA board, programmed using the RP2040.
#13
As I am using my Talos II mostly for gaming currently, I decided to port the Dolphin Emulator. From my work on Libre-SOC I have a good understanding of the Power ISA. At the same time I will also continue working on OpenPOWER Microwatt and jit compilers. Hopefully I will be able to reuse some of the code that I plan to write for a later Box86 / Box64. As a first game for testing I have selected SuperTux Wii (or the GameCube port).
#14
Today I did a talk at libreplanet: Gaming on a Talos II: How I avoid using Steam
A gameplay video is here.

My VR setup includes four ICE40 FPGAs, the first one is the Talos II System FPGA.  The two controllers KN0 and KN1 and the headset T20 use their own bigger FPGAs for lighthouse tracking. I plan to design my own hardware that tracks using lighthouse.

There is also a forum thread on the Trisquel site.
#15
When I yesterday saw that Dolphin was banned from Steam due to a DMCA takedown request, I decided to port the Dolphin Emulator to the POWER9. A few weeks ago I had a look at the the IPL replacement modchip called picoboot for the GameCube. Steam never ran on on any IBM CPU, so I loose nothing if Steam does not my Talos II.