EDIT: Kernel 6.1.0.rc3 (64K pagesize) has finally get this card working! - no need to add any amdgpu.dc or aspm option
TL;DR
- 5.19.x - NOT WORKING
- 6.0.x - NOT WORKING
- 6.1.0 - WORKING
- 6.2.0 - WORKING
- 6.4.0 - WORKING
- 6.5.0 - WORKING
The last time I touched Navi was 2 years ago. I could not get 6900 XT card running on Kernel 5.15.x.
Well time to try again with the Powercolor Fighter 6600 XT (just because its dimension fit the Blackbird)
Two
issues I find:
* HDMI - no video output, I have to use DisplayPort. Not a deal breaker. In fact this issue has always been there with amdgpu for quite awhile
* After restarting the computer, there is no video output to DisplayPort. To workaround this issue, I simply shut down and turn the computer back on. The `dmesg` shows:
[ 4.444382] [drm] amdgpu kernel modesetting enabled.
[ 4.444475] amdgpu: CRAT table disabled by module option
[ 4.444477] amdgpu: DSDT table not found for OEM information
[ 4.444478] amdgpu: IO link not available for non x86 platforms
[ 4.444479] amdgpu: Virtual CRAT table created for CPU
[ 4.444493] amdgpu: Topology: Add CPU node
[ 4.444637] amdgpu 0000:03:00.0: enabling device (0544 -> 0546)
[ 4.444651] [drm] initializing kernel modesetting (DIMGREY_CAVEFISH 0x1002:0x73FF 0x148C:0x2412 0xC1).
[ 4.444666] [drm] register mmio base: 0x00000000
[ 4.444668] [drm] register mmio size: 1048576
[ 4.472159] [drm] add ip block number 0 <nv_common>
[ 4.472163] [drm] add ip block number 1 <gmc_v10_0>
[ 4.472166] [drm] add ip block number 2 <navi10_ih>
[ 4.472168] [drm] add ip block number 3 <psp>
[ 4.472170] [drm] add ip block number 4 <smu>
[ 4.472173] [drm] add ip block number 5 <dm>
[ 4.472175] [drm] add ip block number 6 <gfx_v10_0>
[ 4.472177] [drm] add ip block number 7 <sdma_v5_2>
[ 4.472180] [drm] add ip block number 8 <vcn_v3_0>
[ 4.472182] [drm] add ip block number 9 <jpeg_v3_0>
[ 4.502462] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from ROM BAR
[ 4.502479] amdgpu: ATOM BIOS: 113-D53201XT-016
[ 4.567090] [drm] VCN(0) decode is enabled in VM mode
[ 4.567092] [drm] VCN(0) encode is enabled in VM mode
[ 4.604512] [drm] JPEG decode is enabled in VM mode
[ 4.604515] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
[ 4.604519] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
[ 4.604526] amdgpu 0000:03:00.0: amdgpu: PCIE atomic ops is not supported
[ 4.604531] amdgpu 0000:03:00.0: amdgpu: MODE1 reset
[ 4.604533] amdgpu 0000:03:00.0: amdgpu: GPU mode1 reset
[ 4.604604] amdgpu 0000:03:00.0: amdgpu: SMU: valid command, bad prerequisites: index:2 param:0x00000000 message:GetSmuVersion
[ 4.604607] amdgpu 0000:03:00.0: amdgpu: GPU psp mode1 reset
[ 5.295020] [drm] psp mode 1 reset failed!
[ 5.295022] amdgpu 0000:03:00.0: amdgpu: GPU mode1 reset failed
[ 5.295094] amdgpu 0000:03:00.0: amdgpu: asic reset on init failed
[ 5.295096] amdgpu 0000:03:00.0: amdgpu: Fatal error during GPU init
[ 5.295098] amdgpu 0000:03:00.0: amdgpu: amdgpu: finishing device.
[ 5.296261] amdgpu: probe of 0000:03:00.0 failed with error -22