Third Party Hardware > GPU Compute / Accelerators
Necessary firmware for Navi14
power9mm:
what i can find..
ClassicHasClass:
What about starting X directly from the command line (usually `startx` or some such: I don't run Fedora with a display manager at all)?
power9mm:
well, i installed fedora 37, and i'm still getting the same-ish issue of it just hanging at boot. not sure if its my gpu (amd vega 64) or theres something i'm messing up, but i add those commands and update grub so I'm not sure.
MPC7500:
Wait. When you're blacklisting the AST GPU you have to switch to the AMD GPU as well.
Means, after you are hitting enter in Petitboot, you have to switch to the port where the AMD GPU is connected, immediately.
Otherwise, the OS don't recognize the AMD GPU.
If you still stay on the AST port after blacklisting this GPU, you will get exactly this picture. It is logical that the Display Manager cannot start then.
power9mm:
I tried that, also tried without an hdmi connected at all and i'd get a blank black screen when the system would switch to DP outpout.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version