AMD RX 6900 XT from Sapphire NITRO

[tle]

That looks promising. Since the 7000 series has been announced, I would expect 6600 XT would drop down in price soon. Fingercross 5.19 and 6.0 would support Navi 23 correctly

[tle]

6600 XT is confirmed working fine with kernel 6.1.0

See: https://forums.raptorcs.com/index.php/topic,429.0.html

[tle]

Good news folks, 6900 XT runs fine under 6.1.0rc3!

If you know anyone in Victoria, Australia that might be able to lend me 6800 or 6700 card for few hours, please reach out to me via private message

[rjzak]

Good news folks, 6900 XT runs fine under 6.1.0rc3!

If you know anyone in Victoria, Australia that might be able to lend me 6800 or 6700 card for few hours, please reach out to me via private message

Working, and with 64k pages too if I remember correctly. This is good news. Does that mean other AMD GPUs also work under 64k pages?

[MPC7500]

Yes. Bug is fixed since 5.10.101.

[MPC7500]

It seems amdgpu is broken again on Navi.

[MauryG5]

I just read Q66's post on Navi10 and I read that now he is seeing that 6.1.rc7 has problems with RX 5700 and he says they have problems like there have been for version 5.19 but I replied that I personally have never had any problems with Kernel versions 5.18 and 5.19 with RX5700... I don't understand what you mean with that sentence about the Navi10 problem with Kernel 5.19...

[adaptl]

I am having a really hard time getting my 6600 to work on gentoo w/ linux 6.6

If anyone has any advice for getting it working, please give me a shout

[Hasturtium]

I am having a really hard time getting my 6600 to work on gentoo w/ linux 6.6

If anyone has any advice for getting it working, please give me a shout

I've had an RX 6600 (and, later, a W6600) running without much incident on Fedora since around kernel 6.2. Dumb screening questions first:
- have you installed all the latest device firmware to go with that kernel?
- have you gotten a different GPU working in this machine before?
- what's the kernel page size?

[adaptl]

I am having a really hard time getting my 6600 to work on gentoo w/ linux 6.6

If anyone has any advice for getting it working, please give me a shout

I've had an RX 6600 (and, later, a W6600) running without much incident on Fedora since around kernel 6.2. Dumb screening questions first:
- have you installed all the latest device firmware to go with that kernel?
- have you gotten a different GPU working in this machine before?
- what's the kernel page size?

I got it working, I just needed to disable the ast driver like with the RX580 I used to have. The trouble is that now I don't have petitboot over HDMI so I need to unlock my hard drive over serial, so I'm working on compiling the firmware again to try to update it.