Author Topic: [ISSUE] ata3 softreset failed and slow reboot  (Read 4649 times)

tle

  • Sr. Member
  • ****
  • Posts: 462
  • Karma: +53/-0
    • View Profile
    • Trung's Personal Website
[ISSUE] ata3 softreset failed and slow reboot
« on: November 03, 2022, 11:52:32 pm »
I've noticed that since version 5.15, I've seen quite a number of following error:

ata3: softreset failed (1st FIS failed)

whenever I reboot the computer. This error takes at least 10 seconds til:

ata3: reset failed, giving up

Just wondering if anyone has bumped into similar error
« Last Edit: November 15, 2022, 05:25:31 pm by tle »
Faithful Linux enthusiast

My Raptor Blackbird

ClassicHasClass

  • Sr. Member
  • ****
  • Posts: 462
  • Karma: +35/-0
  • Talospace Earth Orbit
    • View Profile
    • Floodgap
Re: ata3 softreset failed and slow reboot
« Reply #1 on: November 04, 2022, 04:43:47 pm »
Yes, with my SATA optical drives. It's kept me on 5.13 because it won't see them at all.

@sharkcz have you run into this?

rheaplex

  • Newbie
  • *
  • Posts: 24
  • Karma: +2/-0
    • View Profile
Re: ata3 softreset failed and slow reboot
« Reply #2 on: November 05, 2022, 01:24:49 am »
Yes I get ata2 complaining similarly.

sharkcz

  • Newbie
  • *
  • Posts: 19
  • Karma: +3/-0
    • View Profile
Re: ata3 softreset failed and slow reboot
« Reply #3 on: November 05, 2022, 12:34:49 pm »
I have searched thru my whole journal and there is no such message. My SATA controller is Marvell 88SE9128 (RAID controller with HyperDuo) with a SATA SSD (the on-board Adaptec SAS controller didn't like it much) and an optical drive connected.

sharkcz

  • Newbie
  • *
  • Posts: 19
  • Karma: +3/-0
    • View Profile
Re: ata3 softreset failed and slow reboot
« Reply #4 on: November 05, 2022, 12:46:03 pm »
Also, can the start of these messages/errors be tied to a specific kernel version? What are your the SATA controllers?

ClassicHasClass

  • Sr. Member
  • ****
  • Posts: 462
  • Karma: +35/-0
  • Talospace Earth Orbit
    • View Profile
    • Floodgap
Re: ata3 softreset failed and slow reboot
« Reply #5 on: November 05, 2022, 08:28:31 pm »
The SATA controller in this unit is another Marvell, but a different chipset (lspci says 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller (rev 11)). I believe this is the one Raptor sells. It has two optical drives connected; the main volumes / and /home are NVMe SSDs.

sharkcz

  • Newbie
  • *
  • Posts: 19
  • Karma: +3/-0
    • View Profile
Re: ata3 softreset failed and slow reboot
« Reply #6 on: November 06, 2022, 03:27:48 am »
I suspect the way out is to pinpoint the issue to a specific kernel version(s) and then bisect ... AFAIK the AmigaOne people are running into similar kind of issues as the mainline kernel changes and the kernel maintainers are listening to them.

ClassicHasClass

  • Sr. Member
  • ****
  • Posts: 462
  • Karma: +35/-0
  • Talospace Earth Orbit
    • View Profile
    • Floodgap
Re: ata3 softreset failed and slow reboot
« Reply #7 on: November 06, 2022, 11:12:30 am »
tle and rheaplex, are you using the same Marvell chipset?

rheaplex

  • Newbie
  • *
  • Posts: 24
  • Karma: +2/-0
    • View Profile
Re: ata3 softreset failed and slow reboot
« Reply #8 on: November 06, 2022, 05:34:39 pm »
My controller (from Raptor) is:

0001:01:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9215 PCIe 2.0 x1 4-port SATA 6 Gb/s Controller (rev 11)

tle

  • Sr. Member
  • ****
  • Posts: 462
  • Karma: +53/-0
    • View Profile
    • Trung's Personal Website
Re: ata3 softreset failed and slow reboot
« Reply #9 on: November 07, 2022, 12:11:50 am »
Mine is

0002:01:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller (rev 11)
Faithful Linux enthusiast

My Raptor Blackbird

sharkcz

  • Newbie
  • *
  • Posts: 19
  • Karma: +3/-0
    • View Profile
Re: ata3 softreset failed and slow reboot
« Reply #10 on: November 07, 2022, 04:34:14 am »
It looks to me that mine "9128" is a different generation than yours 9215/9235, it might explain the different behaviour.