Author Topic: Using the μPCIe connector (J10108)  (Read 2599 times)

pocock

  • Sr. Member
  • ****
  • Posts: 280
  • Karma: +31/-0
    • View Profile
Using the μPCIe connector (J10108)
« on: June 17, 2020, 06:04:47 am »
The manual:
https://wiki.raptorcs.com/w/images/e/e3/T2P9D01_users_guide_version_1_0.pdf

mentions a μPCIe connector (J10108)

How many lanes does it support?

Can anybody give any example of products that can be connected with this?  For example, can it be used with an M.2 or U.2 adapter for SSDs?
Debian Developer
https://danielpocock.com

pocock

  • Sr. Member
  • ****
  • Posts: 280
  • Karma: +31/-0
    • View Profile
Re: Using the μPCIe connector (J10108)
« Reply #1 on: October 17, 2021, 05:29:37 am »
The manual suggests it is 4 lanes (PCIe 4.0 x4)

The errata states it is an Oculink SFF-8621 physical connector but it is not completely wired for Oculink

Nonetheless, do the PCIe lanes work sufficiently for an SFF-8621 to U.2 NVMe cable?

Here is an example of the cable CBL-SAST-0956 from Supermicro

The cable is not very expensive, I might simply buy one to try it.
Debian Developer
https://danielpocock.com

pocock

  • Sr. Member
  • ****
  • Posts: 280
  • Karma: +31/-0
    • View Profile
Re: Using the μPCIe connector (J10108)
« Reply #2 on: October 17, 2021, 06:20:27 am »
I notice the micro PCIe socket is right under one of the PCIe cards.  This means it may be better to use a cable with right angle (RA) connector like this:

Supermicro CBL-SAST-0955
Debian Developer
https://danielpocock.com

Hasturtium

  • Full Member
  • ***
  • Posts: 124
  • Karma: +10/-0
    • View Profile
Re: Using the μPCIe connector (J10108)
« Reply #3 on: October 21, 2021, 03:48:22 pm »
The manual suggests it is 4 lanes (PCIe 4.0 x4)

The errata states it is an Oculink SFF-8621 physical connector but it is not completely wired for Oculink

Nonetheless, do the PCIe lanes work sufficiently for an SFF-8621 to U.2 NVMe cable?

Here is an example of the cable CBL-SAST-0956 from Supermicro

The cable is not very expensive, I might simply buy one to try it.

I've seen Raptor offer the cable when you buy a Blackbird combo, so it's presumably a supported use case. I'm thinking about doing that after I've tested my incoming Blackbird for stability and gotten a feel for its performance with SATA.

bobpaul

  • Newbie
  • *
  • Posts: 2
  • Karma: +2/-0
    • View Profile
Re: Using the μPCIe connector (J10108)
« Reply #4 on: February 07, 2024, 02:26:14 pm »
Has anyone tried this yet?