526
User Zone / Re: Fedora Linux Thread
« on: December 11, 2019, 05:25:46 pm »
I don't recall doing anything special, tbh. This is on a Talos II; I don't know if it's different for a Blackbird but IIRC it "just worked."
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
527
Legacy POWER Hardware / Re: Old stuff survey
« on: December 10, 2019, 10:49:49 pm »The most recent X 5000 has the Freescale P5020 or P 5040 but without Altivec and they are based on Power 8 if I remember correctly ...
POWER7, actually. They implement Power ISA v2.06 (https://wiki.raptorcs.com/wiki/Power_ISA) and are BE only.
Not to be a (terrible) pedant, but while they do indeed implement (at least most of) the later ISA, the QorIQ e5500 microarchitecture doesn't have much in common with POWER7's. It's essentially a 64-bit e500 without the SPE crap and an FPU borrowed from the e600, itself an evolution of the 744x G4. The lack of AltiVec/VMX is a terrible omission, however, and limits its utility for general purpose computing. It's really an embedded part and meant for that application, and I have said in other places how much of a disservice I think running such CPUs in pricey desktops is to the Amiga community.
Quote
Confusingly the actual product page (https://www.nxp.com/products/processors-and-microcontrollers/power-architecture/qoriq-communication-processors/p-series/qoriq-p5020-and-p5010-64-bit-dual-and-single-core-communications-processors:P5020) refers to a "P5 platform" which I suspect is not POWER5, but I have no idea offhand what it is. I do know the 4 core and up chips have a mystery management core of some sort, but then again with pre-OpenPOWER stuff the chips weren't exactly open source firmware across the board regardless of vendor.
P5 just means the Freescale-internal generation; it is not related in any way to IBM POWER generations.
528
Blackbird / Re: Heatsink dual fan configuration
« on: December 10, 2019, 10:35:16 pm »
What do you mean, "dual fan configuration"? My Blackbird has four fans, two on each fan header (CPU and case) using a splitter. I can observe both pairs operating independently.
Or are you referring to some sort of dual HSF assembly?
Or are you referring to some sort of dual HSF assembly?
529
User Zone / Re: Fedora Linux Thread
« on: December 10, 2019, 10:32:08 pm »
I use https://extensions.gnome.org/extension/120/system-monitor/ personally. It's not perfect but it does give me temperature and fan rpm.
530
Legacy POWER Hardware / Re: Old stuff survey
« on: December 09, 2019, 12:58:40 am »
Yes, BeOS 5.
If we're going to list Power Mac/Apple stuff, too, I'll just list the exceptional items and/or the items I use frequently:
Apple Network Server 500 (and 700, and a non-working prototype)
Quad G5
MDD G4 (with a dual 1.8GHz 7447A Sonnet upgrade)
PowerBook G4 DLSD
Mac mini G4/1.5
iBook G4/1.33
iMac G4/1.25
TiBook G4 867MHz
Power Mac 7300 (with an 800MHz 7455 Sonnet upgrade)
iMac G3 (with a 600MHz G3 Sonnet upgrade)
Twentieth Anniversary Mac (with a 500MHz G3 Sonnet upgrade)
PowerBook 1400 (with a 466MHz G3 Sonnet upgrade)
Sawtooth G4/450
Except for the ANS, which runs AIX, and the mini, which runs NetBSD, these machines all run MacOS 9 or Mac OS X (the DLSD runs 10.5 and everything else runs 10.4).
If we're going to list Power Mac/Apple stuff, too, I'll just list the exceptional items and/or the items I use frequently:
Apple Network Server 500 (and 700, and a non-working prototype)
Quad G5
MDD G4 (with a dual 1.8GHz 7447A Sonnet upgrade)
PowerBook G4 DLSD
Mac mini G4/1.5
iBook G4/1.33
iMac G4/1.25
TiBook G4 867MHz
Power Mac 7300 (with an 800MHz 7455 Sonnet upgrade)
iMac G3 (with a 600MHz G3 Sonnet upgrade)
Twentieth Anniversary Mac (with a 500MHz G3 Sonnet upgrade)
PowerBook 1400 (with a 466MHz G3 Sonnet upgrade)
Sawtooth G4/450
Except for the ANS, which runs AIX, and the mini, which runs NetBSD, these machines all run MacOS 9 or Mac OS X (the DLSD runs 10.5 and everything else runs 10.4).
531
User Zone / Re: Graphics Card install
« on: December 08, 2019, 04:25:25 pm »
I do read this board too, y'know. 
532
Legacy POWER Hardware / Old stuff survey
« on: December 08, 2019, 04:13:34 pm »
Since Raptor is offering this subforum, I'm wondering what old Power-based stuff people have hanging around. I'm sure a fair number of folks have Power Macs, and the number of Power Macs, PowerBooks, etc. in this house is too many to enumerate exactly, but what other old school Power hardware do you have?
IBM hardware:
2-way SMT-2 POWER6 (Type 8203-E4A), which runs Floodgap
IBM ThinkPad 860
IBM ThinkPad "800" Type 6020 (SCSI fuse got opened by a bad SCSI2SD; at some point imma repair this)
Be hardware:
BeBox dual 133MHz 603
Microsoft hardware:
Xbox 360 (one with mod chip, one without)
You can see most of these at http://www.floodgap.com/etc/machines.html and http://www.floodgap.com/retrobits/riscy/ . What's lurking in your machine room?
IBM hardware:
2-way SMT-2 POWER6 (Type 8203-E4A), which runs Floodgap
IBM ThinkPad 860
IBM ThinkPad "800" Type 6020 (SCSI fuse got opened by a bad SCSI2SD; at some point imma repair this)
Be hardware:
BeBox dual 133MHz 603
Microsoft hardware:
Xbox 360 (one with mod chip, one without)
You can see most of these at http://www.floodgap.com/etc/machines.html and http://www.floodgap.com/retrobits/riscy/ . What's lurking in your machine room?
533
General OpenPOWER Discussion / Re: Ahoy shipmates!
« on: November 24, 2019, 08:31:01 pm »
Signed on.
