271
User Zone / Re: Graphics Card install
« on: December 22, 2019, 03:42:43 pm »
I don't know what command you executed. I don't know what kind of error you got.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
272
User Zone / Re: Graphics Card install
« on: December 21, 2019, 05:52:50 pm »
make -j`nproc` doesn't give me an error …
Little bit of googling
difference between nproc "make -j"
Google again
fatal error: openssl/opensslv.h: No such file or directory fedora
Quote from the thread
But it's good that you've made some progress on your own.
Little bit of googling
difference between nproc "make -j"
Google again
fatal error: openssl/opensslv.h: No such file or directory fedora
Quote from the thread
Quote
To install OpenSSL development package on Fedora, CentOS or RHEL
Code: [Select]
sudo yum install openssl-develBut it's good that you've made some progress on your own.
273
User Zone / Re: Graphics Card install
« on: December 20, 2019, 01:22:48 pm »Then go to the folder boot and see what file(s) you find with the name config-*.ppc64le.
Googling a little bit
List file names Linux
Code: [Select]
ls /boot/config-*.ppc64le
/boot/config-5.3.16-200.fc30.ppc64le
/boot/config-5.3.16-300.fc31.ppc64leWhat's the problem here?
274
User Zone / Re: Graphics Card install
« on: December 19, 2019, 04:28:15 pm »
Googling a little bit
Linux command cp
/boot/ is a folder.
config-*.ppc64le is a file.
There seems to be something wrong with this file. Then go to the folder boot and see what file(s) you find with the name config-*.ppc64le. The * is a placeholder. Then you'll understand what the problem is.
Linux command cp
/boot/ is a folder.
config-*.ppc64le is a file.
There seems to be something wrong with this file. Then go to the folder boot and see what file(s) you find with the name config-*.ppc64le. The * is a placeholder. Then you'll understand what the problem is.
275
User Zone / Re: Graphics Card install
« on: December 19, 2019, 12:47:24 pm »
It looks like I'm ready for Navi
276
User Zone / Re: Graphics Card install
« on: December 18, 2019, 05:39:51 pm »
In the meantime, could you figure out why the error message pops-up?
Also do you know what this line means?
cp /boot/config-*.ppc64le .config
Also do you know what this line means?
cp /boot/config-*.ppc64le .config
277
Blackbird / Re: Heatsink dual fan configuration
« on: December 17, 2019, 05:02:32 pm »
Cool, thanks. I didn't read the thing about the fix. I will give bangBMC also a try. It's quite possible that I'll get back to you, then.
278
User Zone / Re: Graphics Card install
« on: December 17, 2019, 03:44:50 pm »
@meklort: ATM I'm on Fedora 30.
After: make oldconfig I get:
.config:6025:warning: symbol value 'm' invalid for REMOTEPROC
After: make oldconfig I get:
Code: [Select]
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/confdata.o
HOSTCC scripts/kconfig/expr.o
LEX scripts/kconfig/lexer.lex.c
YACC scripts/kconfig/parser.tab.[ch]
HOSTCC scripts/kconfig/lexer.lex.o
HOSTCC scripts/kconfig/parser.tab.o
HOSTCC scripts/kconfig/preprocess.o
HOSTCC scripts/kconfig/symbol.o
HOSTCC scripts/kconfig/util.o
HOSTLD scripts/kconfig/conf
scripts/kconfig/conf --oldconfig Kconfig
.config:6025:warning: symbol value 'm' invalid for REMOTEPROC
*
* Restart config...
*
*
* Platform support
*
IBM PowerNV (Non-Virtualized) platform support (PPC_POWERNV) [Y/n/?] y
OPAL PRD driver (OPAL_PRD) [M/n/y/?] m
Enable removal of RAM from kernel mappings for tracing (PPC_MEMTRACE) [N/y/?] n
IBM Virtual Accelerator Switchboard (VAS) (PPC_VAS) [Y/n/?] y
Expose SCOM controllers via debugfs (SCOM_DEBUGFS) [Y/n/?] y
IBM pSeries & new (POWER5-based) iSeries (PPC_PSERIES) [Y/n/?] y
Support for shared-processor logical partitions (PPC_SPLPAR) [Y/n/?] y
Dispatch Trace Log (DTL) [Y/n/?] y
pSeries energy management capabilities driver (PSERIES_ENERGY) [M/n/y/?] m
Scanlog dump interface (SCANLOG) [Y/n/m/?] y
IO Event Interrupt support (IO_EVENT_IRQ) [Y/n/?] y
LPAR Configuration Data (LPARCFG) [Y/?] y
Support for shared-memory logical partitions (PPC_SMLPAR) [Y/n/?] y
Collaborative memory management (CMM) [Y/n/m/?] y
Hypervisor supplied PMU events (24x7 & GPCI) (HV_PERF_CTRS) [Y/n/?] y
Support for the PAPR Storage Class Memory interface (PAPR_SCM) [M/n/?] m
Secure virtual machine (SVM) support for POWER (PPC_SVM) [N/y/?] (NEW)
.config:6025:warning: symbol value 'm' invalid for REMOTEPROC
279
User Zone / Re: Fedora Linux Thread
« on: December 16, 2019, 07:40:46 pm »
Now I'm back on Fedora Workstation 30 again, without any problems. Tomorrow I'll try to set it up the way I did. And then updated to 31. Let's see if it works then.
281
User Zone / Re: Graphics Card install
« on: December 16, 2019, 03:58:53 pm »
What was your previous step?
282
User Zone / Re: Fedora Linux Thread
« on: December 16, 2019, 03:19:37 pm »
As I said above, to install two DEs to get GNOME working isn't a solution for me.
@sharkcz: Everything (source: media -> Fedora Workstation) doesn't work either. After reboot I got a blank screen with a frozen mouse. I even can't login via ssh (connection refused). On installation I selected ssh root login with password allowed. Alt + Ctrl + F2 doesn't work also.
@sharkcz: Everything (source: media -> Fedora Workstation) doesn't work either. After reboot I got a blank screen with a frozen mouse. I even can't login via ssh (connection refused). On installation I selected ssh root login with password allowed. Alt + Ctrl + F2 doesn't work also.
283
User Zone / Re: Graphics Card install
« on: December 16, 2019, 03:03:05 pm »
I hope you insert the line without the dollar sign? 
284
User Zone / Re: Fedora Linux Thread
« on: December 16, 2019, 02:09:00 pm »
Hi Dan,
thanks for register.
I'll start at the beginning. I had Fedora 30 "Workstation" installed. After Fedora 31 came out, I did the update through the GNOME Store, all without any problems.
A few days ago I wanted to try something different and I deleted Fedora. Then I reinstalled Fedora 30 and did the update via the GNOME Store again.
Then I had the problem that after the update to 31 no login window appears, only a blank screen.
If I now install a minimal Fedora and then Fedora Workstation (--allowerasing or --skip-broken does the job) on top, then after running startx I get the message that an error occurred and I have to log out again.
As MauryG5 wrote before, another DE can be installed without problems. In my opinion it must have something to do with GNOME and or in combination with ASpeed.
I used the "netinstall.iso" and then the "Install-over-network" option. But I can also try Everything.
What surprises me is that the first time the update worked through the GNOME Store. Not the second time. The only difference was IIRC, that the first time I used the two snippets and the GNOME Tweak Tool. The snippets were "Xorg crashes or is laggy with the AST VGA GPU" and "Low Resolution".
The previous error messages can be found above.
I can use the workaround with the other DE, but that's not really a solution for the problem.
Sadly no difference. Same error messages/ problem.
thanks for register.
I'll start at the beginning. I had Fedora 30 "Workstation" installed. After Fedora 31 came out, I did the update through the GNOME Store, all without any problems.
A few days ago I wanted to try something different and I deleted Fedora. Then I reinstalled Fedora 30 and did the update via the GNOME Store again.
Then I had the problem that after the update to 31 no login window appears, only a blank screen.
If I now install a minimal Fedora and then Fedora Workstation (--allowerasing or --skip-broken does the job) on top, then after running startx I get the message that an error occurred and I have to log out again.
As MauryG5 wrote before, another DE can be installed without problems. In my opinion it must have something to do with GNOME and or in combination with ASpeed.
I used the "netinstall.iso" and then the "Install-over-network" option. But I can also try Everything.
What surprises me is that the first time the update worked through the GNOME Store. Not the second time. The only difference was IIRC, that the first time I used the two snippets and the GNOME Tweak Tool. The snippets were "Xorg crashes or is laggy with the AST VGA GPU" and "Low Resolution".
The previous error messages can be found above.
I can use the workaround with the other DE, but that's not really a solution for the problem.
Actually, one last thought: any difference withCode: [Select]dnf install @workstation-product-environment
? Or any of the suggestions on https://docs.fedoraproject.org/en-US/quick-docs/switching-desktop-environments/ ?
Sadly no difference. Same error messages/ problem.
285
User Zone / Re: Graphics Card install
« on: December 16, 2019, 10:51:59 am »
If I C&P this line from the wiki: git clone git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/fedora.git --depth 1 --branch kernel-5.5.0-0.rc1.git0.1.fc32
I get:
I get:
Code: [Select]
...
remote: Enumerating objects: 70582, done.
remote: Counting objects: 100% (70582/70582), done.
remote: Compressing objects: 100% (67516/67516), done.
remote: Total 70582 (delta 5378), reused 29135 (delta 2240)
...
