76
Firmware / reset/clear petitboot password?
« on: January 29, 2023, 07:02:45 pm »
I set a system password but now I can't boot into any OS and it doesnt appear to work on anything other than the shell terminal
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
77
Blackbird / Re: Onboard nic not working
« on: January 29, 2023, 06:16:21 pm »
fwupdmgr doesnt appear to list the onboard NICs. I see them mentioned during boot however..
the motherboard rev is 1.01
the motherboard rev is 1.01
78
Blackbird / Re: Onboard nic not working
« on: January 29, 2023, 03:39:48 pm »
i tried the two dual ethernet ports, not the BMC port. they show as detected upon bootup. i dont know what the firmware is but it should be recent as this was a board from the latest shipment. I haven't attempted any BMC access as i do not have a crossover cable currently.
79
GPU Compute / Accelerators / Re: Necessary firmware for Navi14
« on: January 29, 2023, 02:48:40 pm »
this is what i get when i switch to displayport, and it just hangs here. GPU is amd vega 64. ive had this happen on both tumbleweed and leap.
80
GPU Compute / Accelerators / Re: Necessary firmware for Navi14
« on: January 29, 2023, 02:38:28 pm »
perhaps opensuse requires different commands...?
81
Blackbird / Onboard nic not working
« on: January 29, 2023, 02:35:07 pm »
I can't get any network access with the onboard nic despite the light showing its active. tried this with opensuse and fedora. luckily i had a pcie nic on hand.
82
GPU Compute / Accelerators / Re: Necessary firmware for Navi14
« on: January 29, 2023, 01:53:22 pm »
"modprobe.blacklist=ast video=offb:off amdgpu.aspm=0" when i add this in the bootloader for opensuse leap i get no video whatsoever and it just hangs at boot
83
Applications and Porting / No firefox or other browsers for openSUSE tumbleweed...?
« on: January 29, 2023, 01:09:31 pm »
to my surprise, when I installed openSUSE tumbleweed as leap was giving me some issues. There's absolutely no web browsers in the repos what so ever.
what can I do?
what can I do?
84
Applications and Porting / Re: [GAMES] Quake II RTX!
« on: January 23, 2023, 08:17:43 pm »
https://www.quakeservers.net/quake2/servers/
tastyspleen always has players on their DM servers usually.
tastyspleen always has players on their DM servers usually.
85
Applications and Porting / Re: [GAMES] Quake II RTX!
« on: January 23, 2023, 03:05:39 pm »
i think SMT is configured in petitboot but i'm not sure. haven't booted my system yet. I dont think it would do much for quake 2 rtx either though.
also, you play it online yet lol?
also, you play it online yet lol?
86
Applications and Porting / Re: [GAMES] Quake II RTX!
« on: January 23, 2023, 05:30:41 am »
have you tried playing it with SMT disabled? i'm curious if theres a performance difference.
87
Blackbird / Re: Question about firmware flash switches
« on: January 22, 2023, 02:51:27 pm »
so which setting enables write protection? I assume it's 1, but I want to be sure. I haven't seen it documented specifically.
88
Blackbird / Question about firmware flash switches
« on: January 21, 2023, 02:13:20 pm »
does "1" mean its enabled? and is that film on them a tamper protection?
https://imgur.com/j9cXkwW.png
https://imgur.com/j9cXkwW.png
89
Applications and Porting / Re: [GAMES] Quake II RTX!
« on: January 21, 2023, 08:32:07 am »
should I wait for the intel arc gpu drivers over AMD? i've wanted to play this since it came out and I'd rather wait for power9 support to play it. I might opt for an a770 gpu over an AMD card if it plays well. Maybe a bit off topic but should one even trust an intel gpu moreso over an amd/nvidia lol..?
90
Applications and Porting / Re: [GAMES] Quake II RTX!
« on: January 19, 2023, 12:41:40 pm »
well now I'd like to get a new gpu to play it, but i think i'll wait a bit for driver updates.. Still one of the best gaming benchmarks out there, and runs on POWER too..
