News:

RCS Forums now online!

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tle

#616
If it is polaris 12, the most recent amdgpu in Linux 5.4 should support that card out of the box.

If you want to be sure, buy yourself a Vega10 or 12 cards such as RX Vega 56 or 64. Those cards are confirmed to run perfectly on the host Linux.
#617
AFIK ES does not officially support PowerPC and I am not aware of any custom distribution that support linux ppc64le.

Because ES is written in Java, that means it is super trivial to get it compiled under linux ppc64le host.

If you are interested in how, please have a look at my build script
#618
After upgrading BMC to 2.0, I could no longer ssh into port 2200 to see serial port output.

I can see that `obmc-console-ssh@0-192.168.1.102:2200-192.168.1.146:56308.service` failed to start in openbmc.

Wondering if it is related to the issue...



$ systemctl | grep ssh
● obmc-console-ssh@0-192.168.1.102:2200-192.168.1.146:56308.service   loaded failed failed    Phosphor Host Console SSH Per-Connection (192.168.1.146:56308)


$ journactl -u obmc-console-ssh@0-192.168.1.102:2200-192.168.1.146:56308.service
-- Logs begin at Sun 2020-02-23 07:38:52 UTC, end at Sun 2020-02-23 07:47:44 UTC. -
-
Feb 23 07:43:32 blackbird systemd[1]: [[0;1;31m[[0;1;39m[[0;1;31mobmc-console-ssh@0
-192.168.1.102:2200-192.168.1.146:56308.service: Failed to load environment files:
No such file or directory[[0m
Feb 23 07:43:32 blackbird systemd[1]: [[0;1;39m[[0;1;31m[[0;1;39mobmc-console-ssh@0
-192.168.1.102:2200-192.168.1.146:56308.service: Failed to run 'start' task: No suc
h file or directory[[0m
Feb 23 07:43:32 blackbird systemd[1]: [[0;1;39m[[0;1;31m[[0;1;39mobmc-console-ssh@0
-192.168.1.102:2200-192.168.1.146:56308.service: Failed with result 'resources'.[[0
m
Feb 23 07:43:33 blackbird systemd[1]: [[0;1;31m[[0;1;39m[[0;1;31mFailed to start Ph
osphor Host Console SSH Per-Connection (192.168.1.146:56308).[[0m
Feb 23 07:46:59 blackbird systemd[1]: [[0;1;31m[[0;1;39m[[0;1;31mobmc-console-ssh@0
-192.168.1.102:2200-192.168.1.146:56308.service: Got no socket.[[0m
Feb 23 07:46:59 blackbird systemd[1]: [[0;1;39m[[0;1;31m[[0;1;39mobmc-console-ssh@0
-192.168.1.102:2200-192.168.1.146:56308.service: Failed to run 'start' task: Invali
d argument[[0m
Feb 23 07:46:59 blackbird systemd[1]: [[0;1;39m[[0;1;31m[[0;1;39mobmc-console-ssh@0
-192.168.1.102:2200-192.168.1.146:56308.service: Failed with result 'resources'.[[0
m
Feb 23 07:46:59 blackbird systemd[1]: [[0;1;31m[[0;1;39m[[0;1;31mFailed to start Ph
osphor Host Console SSH Per-Connection (192.168.1.146:56308).[[0m

#619
Unreal Tournament 4 is one great game by EPIC GAME which was developed in crowd sourcing model.

The game development was ceased indefinitely however the community has been keeping it going a bit further out of the official EPIC GAME git repo.

I am not a big fan of this game however I am very curious on getting it compiled and run under vulkan mode to test out my AMD Radeon Vega 64 card.

I have been following the guide by Raptor CS https://wiki.raptorcs.com/wiki/Software/ThirdParty/Guides/Epic/UnrealTournament4. If I understand the context of that guide correctly, Raptor Engineering's Timothy added support for PowerPC by forking from a community fork which added support for Unreal Engine 4.20.

The first hurdle is to build Unreal Engine 4.20 on my Fedora 32 (rawhide) by following instructions on the https://wiki.raptorcs.com/wiki/Software/ThirdParty/Guides/Epic/UnrealEngine

I have got to the steps of compiling libdwarf:


cd Engine/Source/ThirdParty/elftoolchain/build/Linux/libdwarf
./build_native


The source code does not include the `build_native` script. I think Timothy forgot to push that script to the repo OR there might be a missing step to generate that script which was not documented.
Either way, I am trying to unblock myself from this issue by learning the similar script for libelf to see if I could replicate for libdwarf.

Wish me luck
#620
Blackbird / Re: Support for POWER9 22core?
February 19, 2020, 06:01:22 AM
Thanks for the response.
#621
Quote from: ClassicHasClass on February 16, 2020, 07:03:29 PM
What's better about it as compared to, say, DarkPlaces? (I use that and ioquake3 to get my id fix.)

I am not so familiar with DarkPlaces to answer your question. I think it is just as good as vkQuake / QuakeSpasm.

I love to dig in FTEQW a bit more when I have more free time for gaming.
#622
QuoteWhich GPU and driver module do you use?

I am using amdgpu that comes with Linux kernel 5.5.4. My graphic card is Radeon Vega 64
#623
Yup the vkQuake, vulkan port of Quake runs flawlessly on my Fedora 32 (rawhide) box. The `make` does complain about missing `-lvulkan` which can be solved easily by doing soft link sudo ln -sf /usrlib64/libvulkan.so.1.2.131 /usr/lib64/libvulkan.so

#624
Blackbird / Support for POWER9 22core?
February 15, 2020, 09:05:04 PM
The official product page of blackbird stated that the motherboard support up to 8-core POWER9. Wondering if it is possible to use the POWER9 22core?
#625
Firmware / [Guide] How to run firmware temporariliy
February 15, 2020, 09:01:39 PM
I've been playing around with custom built OpenPower firmware. One tips I pick up from Stewart Smith is to use `mbox` to load the firmware from file instead of mtd:


# SSH into OpenBMC
# Load firmware from file
$ mboxctl --backend file:/tmp/blackbird.pnor
$ obmcutil poweron
# once done with testing
$ obmcutil poweroff
$ mboxctl --backend mtd



#626
Good news! DevilutionX v1.0.1 actually does compile successfully on Linux 5.5.0 ppc64le (my box is Fedora 32 rawhide).

There was one issue with libsodium's Findsodium.cmake script that failed to detect my libsodium which is now resolved in 1.0.1.

The game plays perfectly, I am going to spend sometime packaging this app up and chuck the RPM build to Fedora COPR

Video: https://www.youtube.com/watch?v=voVUNkfmZcw
#627
> Great. Now the card only has to work at Petitboot?
Yes.

I think this issue could be resolved with newer Linux kernel. On my host, the card was not working too (under Fedora 32 rawhide running 5.4.17 kernel). I managed to get it working by compiling my own Linux 5.5.0

Let's wait for Raptor CS to bump their firmware linux version
#628
> In the firmware directory you need two directories. amdgpu and radeon. Which files do you have in the directories?

I only copy `amdgpu/vega10_*` files. I did not add any firmware under `radeon` because I don't need any of them.

I can confirm the card running fine under my Linux host

#629
homebrew is a popular package manager for macOS. I have been using it on my MacBook Pro for more than 10 years. It's simple and 'just work'!

Good news is that homebrew has officially support Linux! But not-so-good news is that they don't support ppc64le architecture. Well not until now, introducing a set of patches to port brew to linux ppc64le, you can see more details at https://github.com/homebrew-ppc64le/brew

I have let the homebrew community know about my work on https://discourse.brew.sh/t/preliminary-support-for-ppc64le-platform/6832 and let's hope they would endorse the ppc64le officially.

#630
@MPC7500 yes I have followed the instruction

QuoteBootloader does not show up on monitor(s) attached to a discrete GPU
Most modern discrete GPUs require firmware. As Talos™ II is aimed at a security-conscious audience, we do not currently include GPU firmware in the production firmware images. Instructions are available in the Users Guide to add firmware for your GPU to the PNOR if needed. Note that any added firmware may be able to access and modify data associated with the affected device(s); we strongly recommend you perform a security risk analysis before loading any firmware, and select open firmware where/if it is available.

If you are using a GPU that does not require firmware, or have already added any needed firmware files to the host PNOR, please ensure that the on-board VGA disable jumper (J10109) is capped. The bootloader output will preferentially show up on the on-board VGA port if it remains enabled.

Alternatively, you either use a serial console or VGA monitor / adapter to interact with the bootloader.

I would like to know what the output would be like on the host PNOR when the linux vega10 firmwares are loaded correctly.

Btw, I also did try to disable on-board VGA output by capping the jumper (J10109), nothing is displayed on my monitor.

NOTE: I have tested this graphic card on my Windows PC box, it works perfectly.