Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - tle

Pages: 1 ... 4 5 [6] 7 8 ... 34
76
Firmware / Re: Firmware 2.10 for Talos-II and Blackbird available
« on: March 21, 2024, 09:16:29 pm »
Folks, any idea where could I find 2.10 changes in git repo?

I was looking into https://git.raptorcs.com/git/ but unable to find any changes in blackbird-* that are related

77
Firmware / Re: Firmware 2.10 for Talos-II and Blackbird available
« on: March 17, 2024, 05:30:54 pm »
Quote from: r34per on February 29, 2024, 04:40:17 pm
I may have spoke too soon :( I get no video when I boot into the os, and the boot console spits this out-
Code: [Select]
SIGTERM received, booting...
[   99.149386402,3] PHB#0000[0:0]:                  brdgCtl = 00000002
[   99.149481878,3] PHB#0000[0:0]:             deviceStatus = 00000020
[   99.149523997,3] PHB#0000[0:0]:               slotStatus = 00402000
[   99.149618190,3] PHB#0000[0:0]:               linkStatus = a0840008
[   99.149660035,3] PHB#0000[0:0]:             devCmdStatus = 00100107
[   99.149727651,3] PHB#0000[0:0]:             devSecStatus = 00002000
[   99.149774208,3] PHB#0000[0:0]:          rootErrorStatus = 00000000
[   99.149829970,3] PHB#0000[0:0]:          corrErrorStatus = 00000000
[   99.149869722,3] PHB#0000[0:0]:        uncorrErrorStatus = 00000000
[   99.149918442,3] PHB#0000[0:0]:                   devctl = 00000020
[   99.149955380,3] PHB#0000[0:0]:                  devStat = 00000000
[   99.149996897,3] PHB#0000[0:0]:                  tlpHdr1 = 00000000
[   99.150043352,3] PHB#0000[0:0]:                  tlpHdr2 = 00000000
[   99.150096694,3] PHB#0000[0:0]:                  tlpHdr3 = 00000000
[   99.150143000,3] PHB#0000[0:0]:                  tlpHdr4 = 00000000
[   99.150189643,3] PHB#0000[0:0]:                 sourceId = 00000000
[   99.150231444,3] PHB#0000[0:0]:                     nFir = 0000000000000000
[   99.150275820,3] PHB#0000[0:0]:                 nFirMask = 0030001c00000000
[   99.150319837,3] PHB#0000[0:0]:                  nFirWOF = 0000000000000000
[   99.150378022,3] PHB#0000[0:0]:                 phbPlssr = 0000001c00000000
[   99.150433559,3] PHB#0000[0:0]:                   phbCsr = 0000001c00000000
[   99.150489148,3] PHB#0000[0:0]:                   lemFir = 0000000100280000
[   99.150533384,3] PHB#0000[0:0]:             lemErrorMask = 0000000000000000
[   99.150577353,3] PHB#0000[0:0]:                   lemWOF = 0000000100000000
[   99.150621318,3] PHB#0000[0:0]:           phbErrorStatus = 0000088000000000
[   99.150672497,3] PHB#0000[0:0]:      phbFirstErrorStatus = 0000008000000000
[   99.150728026,3] PHB#0000[0:0]:             phbErrorLog0 = 2148000098000240
[   99.150774762,3] PHB#0000[0:0]:             phbErrorLog1 = a008400000000000
[   99.150823696,3] PHB#0000[0:0]:        phbTxeErrorStatus = 0000000000000000
[   99.150872357,3] PHB#0000[0:0]:   phbTxeFirstErrorStatus = 0000000000000000
[   99.150916641,3] PHB#0000[0:0]:          phbTxeErrorLog0 = 0000000000000000
[   99.150965287,3] PHB#0000[0:0]:          phbTxeErrorLog1 = 0000000000000000
[   99.151018775,3] PHB#0000[0:0]:     phbRxeArbErrorStatus = 4000200000000000
[   99.151074489,3] PHB#0000[0:0]: phbRxeArbFrstErrorStatus = 0000200000000000
[   99.151127737,3] PHB#0000[0:0]:       phbRxeArbErrorLog0 = 02409fde30000000
[   99.151171863,3] PHB#0000[0:0]:       phbRxeArbErrorLog1 = 0000000000000000
[   99.151215896,3] PHB#0000[0:0]:     phbRxeMrgErrorStatus = 0000000000000000
[   99.151260084,3] PHB#0000[0:0]: phbRxeMrgFrstErrorStatus = 0000000000000000
[   99.151315450,3] PHB#0000[0:0]:       phbRxeMrgErrorLog0 = 0000000000000000
[   99.151369016,3] PHB#0000[0:0]:       phbRxeMrgErrorLog1 = 0000000000000000
[   99.151424438,3] PHB#0000[0:0]:     phbRxeTceErrorStatus = 0000000000000000
[   99.151471170,3] PHB#0000[0:0]: phbRxeTceFrstErrorStatus = 0000000000000000
[   99.151517918,3] PHB#0000[0:0]:       phbRxeTceErrorLog0 = 0000000000000000
[   99.151561833,3] PHB#0000[0:0]:       phbRxeTceErrorLog1 = 0000000000000000
[   99.151614682,3] PHB#0000[0:0]:        phbPblErrorStatus = 0000000001000000
[   99.151663274,3] PHB#0000[0:0]:   phbPblFirstErrorStatus = 0000000001000000
[   99.151716727,3] PHB#0000[0:0]:          phbPblErrorLog0 = 0000000000000000
[   99.151762796,3] PHB#0000[0:0]:          phbPblErrorLog1 = 0000000000000000
[   99.151813691,3] PHB#0000[0:0]:      phbPcieDlpErrorLog1 = 0000000000000000
[   99.151858094,3] PHB#0000[0:0]:      phbPcieDlpErrorLog2 = 0000000000000000
[   99.151904253,3] PHB#0000[0:0]:    phbPcieDlpErrorStatus = 00be000000000000
[   99.151959774,3] PHB#0000[0:0]:       phbRegbErrorStatus = 0000004000000000
[   99.152015372,3] PHB#0000[0:0]:  phbRegbFirstErrorStatus = 0000004000000000
[   99.152068905,3] PHB#0000[0:0]:         phbRegbErrorLog0 = 8800006c00000000
[   99.152115691,3] PHB#0000[0:0]:         phbRegbErrorLog1 = 0000000007011000
[   99.152162310,3] PHB#0000[0:0]:                PEST[000] = a440002a00000000 8000000000000000
[   99.152218234,3] PHB#0000[0:0]:                PEST[001] = 8000000000000000 8000000000000000
[   99.152285858,3] PHB#0000[0:0]:                PEST[002] = 8000000000000000 8000000000000000
[   99.152350714,3] PHB#0000[0:0]:                PEST[003] = 8000000000000000 8000000000000000
[   99.152414534,3] PHB#0000[0:0]:                PEST[004] = 8000000000000000 8000000000000000
[   99.152474834,3] PHB#0000[0:0]:                PEST[005] = 8000000000000000 8000000000000000
[   99.152528675,3] PHB#0000[0:0]:                PEST[006] = 8000000000000000 8000000000000000
[   99.152589889,3] PHB#0000[0:0]:                PEST[007] = 8000000000000000 8000000000000000
[   99.152657446,3] PHB#0000[0:0]:                PEST[008] = 8000000000000000 8000000000000000
[   99.152720282,3] PHB#0000[0:0]:                PEST[1ff] = 3740002a03000000 0000000000000000
[    3.560406] EEH: Recovering PHB#0-PE#0
[    3.560433] EEH: PE location: UOPWR.D100029-Node0-SLOT1 PCIE 4.0 X16, PHB location: N/A
[    3.560473] EEH: Frozen PHB#0-PE#0 detected
[    3.560486] EEH: Call Trace:
[    3.560526] EEH: [00000000c094f14c] __eeh_send_failure_event+0x7c/0x160
[    3.560585] EEH: [00000000c2fbde4c] eeh_dev_check_failure+0x2c4/0x6a0
[    3.560634] EEH: [00000000eb293b00] amdgpu_device_rreg.part.0+0x160/0x1f0 [amdgpu]
[    3.560924] EEH: [0000000009854edf] psp_wait_for+0xac/0x130 [amdgpu]
[    3.561223] EEH: [0000000006086f20] psp_v11_0_mode1_reset+0xbc/0x130 [amdgpu]
[    3.561554] EEH: [00000000927ca5cd] psp_gpu_reset+0x88/0xd0 [amdgpu]
[    3.561868] EEH: [000000000d948d66] amdgpu_device_mode1_reset+0x148/0x180 [amdgpu]
[    3.562116] EEH: [00000000d607b75f] nv_asic_reset+0xbc/0x290 [amdgpu]
[    3.562414] EEH: [00000000893f34f2] amdgpu_device_init+0x172c/0x2300 [amdgpu]
[    3.562693] EEH: [00000000d8547fbc] amdgpu_driver_load_kms+0x30/0x1e0 [amdgpu]
[    3.562966] EEH: [000000008c9f0b1b] amdgpu_pci_probe+0x1f0/0x540 [amdgpu]
[    3.563210] EEH: [0000000067c06d95] local_pci_probe+0x68/0x110
[    3.563250] EEH: [000000004224f0ca] work_for_cpu_fn+0x38/0x60
[    3.563290] EEH: [00000000c5105116] process_one_work+0x2a4/0x570
[    3.563332] EEH: [00000000f81a86b6] worker_thread+0x280/0x5b0
[    3.563372] EEH: [00000000bf39fc31] kthread+0x120/0x130
[    3.563409] EEH: [0000000036d034ff] ret_from_kernel_thread+0x5c/0x64
[    3.852813] kernel BUG at drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c:593!
[    3.852840] Oops: Exception in kernel mode, sig: 5 [#1]
[    3.852856] LE PAGE_SIZE=4K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
[    3.852884] Modules linked in: uas usb_storage sd_mod amdgpu(+) gpu_sched drm_buddy i2c_algo_bit drm_display_helper cec rc_core drm_ttm_helper ttm drm_kms_helper xhci_pci xhci_pci_renesas syscopyarea sysfillrect ahci sysimgblt fb_sys_fops libahci xhci_hcd libata drm vmx_crypto gf128mul usbcore scsi_mod drm_panel_orientation_quirks usb_common scsi_common agpgart dm_mirror dm_region_hash dm_log dm_mod btrfs blake2b_generic xor raid6_pq libcrc32c crc32c_generic crc32c_vpmsum
[    3.853130] CPU: 0 PID: 23 Comm: kworker/0:0 Not tainted 6.0.13_1 #1
[    3.853162] Workqueue: events work_for_cpu_fn
[    3.853201] NIP:  c008000002cbb648 LR: c008000002c3cb50 CTR: c008000002cbb5f8
[    3.853241] REGS: c000000002527500 TRAP: 0700   Not tainted  (6.0.13_1)
[    3.853288] MSR:  9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR: 24002248  XER: 20040000
[    3.853339] CFAR: c008000002cbb6dc IRQMASK: 0
[    3.853339] GPR00: c008000002c3cb50 c0000000025277a0 c0080000033b1000 00feffffff900000
[    3.853339] GPR04: 00feffffff900000 c000000002527858 c000000002527860 c0000000024f0000
[    3.853339] GPR08: 0000000000000001 00fe000000000000 0040000000000002 c00800000318aef0
[    3.853339] GPR12: c008000002cbb5f8 c0000003ff7ef600 c000000016e86070 c000000016e86078
[    3.853339] GPR16: c000000016e86068 c000000016e98338 c000000016e86088 c000000016e86090
[    3.853339] GPR20: c000000016e86080 c008000003430dcc 0000000000000100 c000000016e97250
[    3.853339] GPR24: 0000000000000001 c0080000033c5dd0 c000000016e80000 c000000016e85208
[    3.853339] GPR28: c000000016e80000 ffffffffffffffff c000000002527860 c000000002527860
[    3.853711] NIP [c008000002cbb648] gmc_v10_0_get_vm_pde+0x50/0x120 [amdgpu]
[    3.854018] LR [c008000002c3cb50] amdgpu_gmc_get_pde_for_bo+0xa8/0x110 [amdgpu]
[    3.854326] Call Trace:
[    3.854348] [c0000000025277a0] [c0000000025277e0] 0xc0000000025277e0 (unreliable)
[    3.854389] [c0000000025277e0] [c008000002c3cb50] amdgpu_gmc_get_pde_for_bo+0xa8/0x110 [amdgpu]
[    3.854699] [c000000002527830] [c008000002c3cc08] amdgpu_gmc_pd_addr+0x50/0xa8 [amdgpu]
[    3.855008] [c000000002527870] [c008000002cb7b30] gfxhub_v2_0_gart_enable+0x48/0x11f0 [amdgpu]
[    3.855325] [c0000000025278d0] [c008000002cbce30] gmc_v10_0_hw_init+0x88/0x270 [amdgpu]
[    3.855651] [c000000002527960] [c008000002be4a9c] amdgpu_device_init+0x1ee4/0x2300 [amdgpu]
[    3.855968] [c000000002527ac0] [c008000002be6758] amdgpu_driver_load_kms+0x30/0x1e0 [amdgpu]
[    3.856240] [c000000002527b40] [c008000002bdae68] amdgpu_pci_probe+0x1f0/0x540 [amdgpu]
[    3.856532] [c000000002527be0] [c0000000008d6078] local_pci_probe+0x68/0x110
[    3.856583] [c000000002527c60] [c00000000017f5b8] work_for_cpu_fn+0x38/0x60
[    3.856634] [c000000002527c90] [c000000000184ee4] process_one_work+0x2a4/0x570
[    3.856684] [c000000002527d30] [c000000000185a30] worker_thread+0x280/0x5b0
[    3.856725] [c000000002527dc0] [c000000000191a70] kthread+0x120/0x130
[    3.856765] [c000000002527e10] [c00000000000cecc] ret_from_kernel_thread+0x5c/0x64
[    3.856807] Instruction dump:
[    3.856829] 7c7c1b78 fbe1fff8 7c9d2378 f821ffc1 e8850000 794a07c6 7cdf3378 614a0002
[    3.856876] 7d095039 41820074 788982a0 79298002 <0b090000> 893c0d44 2c090000 41820014
[    3.856935] ---[ end trace 0000000000000000 ]---
fast reboot is disabled, and these were the firmware files I used-
Code: [Select]
navi10_asd.bin     navi14_gpu_info.bin  navi14_me_wks.bin   navi14_smc.bin
navi10_ta.bin      navi14_me.bin        navi14_pfp.bin      navi14_sos.bin
navi10_vcn.bin     navi14_mec2.bin      navi14_pfp_wks.bin  navi14_ta.bin
navi14_asd.bin     navi14_mec2_wks.bin  navi14_rlc.bin      navi14_vcn.bin
navi14_ce.bin      navi14_mec.bin       navi14_sdma1.bin
navi14_ce_wks.bin  navi14_mec_wks.bin   navi14_sdma.bin
I tried all manner of combinations of the navi firmware and the ones that did give me video in petitboot would throw the same error.


what is the linux kernel version of firmware 2.10? Some cards are known to be buggy with old kernel, please refer to https://wiki.raptorcs.com/wiki/POWER9_Hardware_Compatibility_List/PCIe_Devices for compatability

78
Applications and Porting / Re: [DEV] An attempt to package chromium for ppc64le in the official Fedora DNF repo
« on: March 15, 2024, 11:36:25 pm »
Yes chromium will be back officially in Fedora 41
https://koji.fedoraproject.org/koji/buildinfo?buildID=2420288

79
Operating Systems and Porting / Tobias is working on porting GNU HURD to POWER9
« on: January 11, 2024, 08:37:11 pm »
Ref: https://lists.gnu.org/archive/html/bug-hurd/2023-10/msg00021.html

I have not used this OS and unlikely would use it as main driver however it's good to know a purist OSS OS is still alive.

80
Operating Systems and Porting / Re: [NEWS] Fedora 39 is here!
« on: November 14, 2023, 05:31:53 am »
Quote from: MauryG5 on November 13, 2023, 12:45:43 am
So they have solved the problem of Gnome's slow speed finally, let's just hope that this time they keep it in the next versions too.  Can't you tell us anything new about Chromium?  We still don't have a valid alternative to Firefox when needed unfortunately... On Debian I have both and they work perfectly because if one of the 2 doesn't work well there's the other and even if it's rare but it can happen...

It's been awhile and lots of patches no longer work out of the box. I was attempting to get chromium build for Fedora 39 but the page did not load correctly and I was so occupied with family and work that I could not find time to get to the bottom of fixing it.


81
Operating Systems and Porting / Re: [NEWS] Fedora 39 is here!
« on: November 12, 2023, 09:11:16 pm »
I am impressed with the optimisation of GNOME 45. Animation is no longer sluggish like that of 38. Other programs such as GNOME Calendar starts very quickly.

Highly recommended!

82
Applications and Porting / Re: [GAME] Minecraft Java Edition (LWJGL being ported)
« on: November 09, 2023, 06:17:18 pm »
GOOOD NEWS folks! https://github.com/LWJGL/lwjgl3/issues/495 is finally closed!

LWJGL3 has officially supported PPC64LE!

What does that even mean? That means it is MUCH MUCH easier to customise the client to run on linux ppc64le.

83
Blackbird / Re: Need help with troubleshooting failed to boot issue
« on: November 07, 2023, 08:31:39 pm »
Great thanks. It turns out the new PSU is faulty. I have tried other PSU and they work perfectly.

84
Operating Systems and Porting / [NEWS] Fedora 39 is here!
« on: November 07, 2023, 05:17:02 pm »
Ref: https://fedoramagazine.org/announcing-fedora-linux-39/

It is probably one of the best distro for ppc64le as of 2023

85
Blackbird / Need help with troubleshooting failed to boot issue
« on: November 06, 2023, 09:49:54 pm »
I posted a video outlining the issue I have with my blackbird at https://youtu.be/8r1HVoI3_8g?si=NhNTnHAdR-HJLJit

TL;DR; 2 days ago my old PSU died. So I replaced it with a new PSU
and now my motherboard refuse to power up.

Any help is greatly appreciated

86
General OpenPOWER Discussion / Re: Announcement from Raptor / Solid Silicon Corp
« on: October 22, 2023, 11:56:44 pm »
Sorry I was wrong. I misread the announcement. If it is PowerISA 3.1 then it is likely POWER10-compatible..

87
General OpenPOWER Discussion / Re: Announcement from Raptor / Solid Silicon Corp
« on: October 22, 2023, 06:58:52 pm »
S1 is now confirmed a POWER9. There are so many quirks with the way Raptor motherboard arranges components. Notably the PCIe slots leaves no room to install big GPU card.

Here are my wishlist for S1-based Raptor (if they are to use the same name):

* Hibernation
* built-in NVMe slot for host OS
* 4 USB ports: 2x USB type C and 2x USB type A
* 1 2.5GbE ethernet port
* Another PCIex4 slot

88
General OpenPOWER Discussion / POWER11 on the horizon?
« on: October 19, 2023, 05:43:15 pm »
According to the article on Phoronix (ref: https://www.phoronix.com/news/GCC-PowerPC-Future-POWER11) it's seems to me the bunch of PowerPC-future patches could be that of next revision of PowerISA and likely that of POWER11.

89
Applications and Porting / Re: The core OCaml system now supports PPC64 ELF ABI V2
« on: October 17, 2023, 03:24:27 pm »
Such a great news :)

90
Applications and Porting / Re: [DEV] The rust-ring library has finally got ppc64le build!!
« on: October 08, 2023, 07:39:10 pm »
Version 0.17.2 is out! With PPC64LE support! https://github.com/briansmith/ring/commit/f6d9efd5b3252c2911ab561670e4dc4c1c2db0da

Pages: 1 ... 4 5 [6] 7 8 ... 34