Raptor Computing Systems Community Forums (BETA)
Raptor Computing Systems Hardware => Talos II => Topic started by: rjzak on February 01, 2021, 05:18:54 pm
-
I'm new to Raptor systems, and I have been granted remote access to a Talos II machine. I need to install the OS, but haven't been successful. So far, I tried the Ubuntu 20.10 PPC64LE and Debian PPC64LE full CD installer over the virtual media, and from the serial connection, I can see the kernel crashes. I have been able to get to the menus in the serial connection for the Debian network installer, but I don't know the network settings. Is it ok to reuse the BMC IP? Is it a safe assumption that the BMC shares the first Ethernet connection port? Next I'm trying Void Linux to see if that's an improvement.
-
Don't reuse the BMC's IP, you may need it to ssh into it. However, it does share the first Ethernet port. Void Linux should boot like a champ; so should Fedora.
-
I'm new to Raptor systems, and I have been granted remote access to a Talos II machine. I need to install the OS, but haven't been successful. So far, I tried the Ubuntu 20.10 PPC64LE and Debian PPC64LE full CD installer over the virtual media, and from the serial connection, I can see the kernel crashes. I have been able to get to the menus in the serial connection for the Debian network installer, but I don't know the network settings. Is it ok to reuse the BMC IP? Is it a safe assumption that the BMC shares the first Ethernet connection port? Next I'm trying Void Linux to see if that's an improvement.
Can you copy / paste the crash messages here so we can take a look? We should be able to resolve the problem rapidly once we know what you're seeing.
Thank you!
-
Screenshot of the serial console is attached, it looks like its running some graphical interface but the KVM functionality of the BMC isn't catching it (it's blank).
-
I went to another part of the BMC, and back to KVM, and the login prompt for Void appeared! All looks good and straight forward, except that it seems I can't configure the network. The first interface doesn't work with DHCP, and it seems the second interface isn't connected. This is a test machine provided by Raptor, and they haven't responded to my email, which is why I came to the forum.
What's annoying is that the KVM interface periodically blanks out, and the Refresh button doesn't work. I have to go to some other page, like Sensors, then back to KVM to see the screen. I have Void installed, but since DHCP and network information isn't provided, I'm at a point where I can't continue my evaluation.
-
Did you set the date to a correct value? Otherwise Ethernet will not work.
-
@SiteAdmin is Raptor, or at least someone on their technical staff.
It looks like you're doing this through the OpenBMC web interface?
-
@SiteAdmin is Raptor, or at least someone on their technical staff.
It looks like you're doing this through the OpenBMC web interface?
This is all done via the OpenBMC web interface. That's all that was provided.
Did you set the date to a correct value? Otherwise Ethernet will not work.
That's the first I've ever heard of that...
-
@SiteAdmin is Raptor, or at least someone on their technical staff.
That's correct -- it's a shared account for moderating and some limited interaction. We were responding here since it made sense to potentially pull in some community resources depending on what you were looking to do.
Did you set the date to a correct value? Otherwise Ethernet will not work.
That's the first I've ever heard of that...
Likewise.
Regarding DHCP, when the test machine was provided to you there were two static IP addresses given. The first was for the BMC (already configured), and the second was to configure the connected inferface (the one shared with the BMC). Once you configure the interface to that IP address, you will have full connectivity. There is no DHCP on the network segment the evaluation machines are connected to. You would need to use a public DNS resolver such as 1.1.1.1, 8.8.8.8, or 9.9.9.9.
-
I've been able to connect, set an IP, install needed packages. Thank you for the help!