Messages

526

User Zone / Re: Sound card enabling

« on: March 31, 2020, 01:35:45 pm »

Yes, this I understood on AE-9, so you mean I have to check in Alsa's list if there is the RME mentioned in the wiki. Well thanks for the information I check Alsa's list and see if I find it ... thanks

527

User Zone / Re: Sound card enabling

« on: March 31, 2020, 07:32:53 am »

you want to tell me that it is enough to install the card and with Alsa that is already supplied by default on Linux I can make the card work without the need for specific additional drivers ??

528

Blackbird / Re: Menu and options of PetitBoot

« on: March 31, 2020, 01:11:21 am »

ok understood Classic, thanks for the clarification, then it would take someone who can do it ... :-)

529

Blackbird / Re: Menu and options of PetitBoot

« on: March 30, 2020, 05:18:48 pm »

does that mean there is a request to improve the Petitboot menu? I'm reading this but I don't know if they want to understand this meaning or anything ...

530

User Zone / Re: RME Sound card enabling

« on: March 30, 2020, 04:28:03 pm »

Hi everyone, unfortunately, currently unable to use Creative's excellent Sound Blaster AE-9, for lack of drivers, I was turning my attention to a sound card that the Wiki guide says to be working on Power or the RME HDSPe AIO . Does anyone know how to make it work and where to find any drivers that are needed to make it work properly on our Power systems? Thanks

531

Blackbird / Menu and options of PetitBoot

« on: March 30, 2020, 04:02:10 pm »

Hi guys, I asked Raptor why our Petitboot after starting BMC on Power, does not have the menu with all those options and information that the motherboards of X86 systems have, for example CPU type, speed, temperature, number of fans installed and their speed in real time, installed memory, speed of the same etc ... They sent me this link but I don't know how to use it and why even if I understand that my answer lies in this link. Can any of you explain to me more specifically this thing? Thanks




open-power/petitboot
github.com
That sounds like a great enhancement request for https://github.com/open-power/petitboot !

532

Applications and Porting / Re: Playstation 1 emulator for POWER platform?

« on: March 28, 2020, 03:38:12 pm »

Unfortunately, no, that's why I asked you. I the only one that I know you know him too or Unrial tournament, only that as you told me, you are currently missing parts because of which you cannot continue. Other I don't know.

533

General Discussion / Re: Printers and management drivers

« on: March 28, 2020, 02:34:43 pm »

Guys then, thanks to MPC who always manages to give me the right tips and helps me a mess, I did as he said, I opened that folder and following a guide that I found on the internet I tried to install those drivers downloaded from site. Well the system told me that there were errors regarding the architecture but some things seem to have installed in any case. After I did a search and I saw that to have the printer recognized and configured, you must have CUPS installed that I didn't have and then you must enter via a browser to be able to configure it. At that point, once I entered, I was able to configure the printer and in the end I was able to establish the connection and make it work. So a special thank you to friend MPC7500 for his valuable advice!

534

General Discussion / Re: Printers and management drivers

« on: March 27, 2020, 11:28:47 am »

Currently I use the M2070 on Mac, never used on Linux, the drivers on Linux are the ones that I downloaded some time ago and that you also posted. But I didn't know the Norch folder and I didn't know this. So you advise to see that folder and see if the drivers are written in a universal language that can read any platform or if they are binary and therefore specific for architecture ... I seem to understand this

535

Applications and Porting / Re: Playstation 1 emulator for POWER platform?

« on: March 26, 2020, 03:56:22 pm »

I got it. But do you feel something newer that runs with the Unreal Engine 4 graphics engine like I know, Tekken 7 or similar?

536

Applications and Porting / Re: Playstation 1 emulator for POWER platform?

« on: March 26, 2020, 08:31:06 am »

Wow congratulations tle, you're always very active on the games front and various emulators, good. But it would take something newer don't you think? Like a PS2 emulator for example.

537

General Discussion / Re: Printers and management drivers

« on: March 26, 2020, 08:27:10 am »

In any case I had already tried these drivers but they don't work because they are certainly for X86 architecture. Our current problem I think is that there are no support drivers for the various printers on Power, it is one of the gaps that we should try to fill ...

538

Blackbird / Re: Heatsink dual fan configuration

« on: March 25, 2020, 04:33:03 pm »

Yes, I know, when they need to increase their speed, the problem was that by sticking at low speed all the time, they made it warm up a bit in the upper part of the case. Now it does not happen anymore because this fan is more adequate in size and I turn it at a constant average speed and in this way it goes great and makes to dispose of the little heat that was formed before.

539

General Discussion / Re: Printers and management drivers

« on: March 25, 2020, 04:29:25 pm »

Ok MPC but these drivers are not written for X86?

540

General Discussion / Re: Printers and management drivers

« on: March 25, 2020, 10:56:24 am »

The problem, however, arises when we need to connect a printer directly via USB cable, we would therefore need to have a specific development of drivers in the Power version that is currently perhaps missing. For example, I have a Samsung 2070M and unfortunately I can currently only use it on Mac because on Power I cannot use it as there are no drivers that allow me to recognize it. Is there anything that is being worked on in this regard?