Topics

136

Blackbird / [Need guidance] Troubleshooting Readeon Vega 64 graphic card no output on boot

« on: February 03, 2020, 06:27:41 am »

UPDATE: The issue is still around in the 2.0 version of the firmware.

Hi all

I am trying to make Gigabyte Radeon Graphics Card GV-RXVEGA64GAMING OC-8GD card working on boot. I follow the instructions in https://wiki.raptorcs.com/wiki/Add_GPU_Firmware_To_BOOTKERNFW to bundle up firmware then flash those firmwares to PNOR

Code: [Select]

$ sudo dnf install @development-tools
$ git clone https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
$ mkdir -p /tmp/firmwares/amdgpu
$ cp linux-firmware/amdgpu/vega10_* /tmp/firmware/amdgpu/
$ cd /tmp/firmware
$ mksquashfs * /tmp/firmware.bin -all-root -keep-as-directory
$ scp /tmp/firmware.bin root@bmc-ip-address:/tmp/firmware.bin
$ ssh root@bmc-ip-address
$ pflash -P BOOTKERNFW -e -p /tmp/firmware.bin

When the system boot up, no video output is detected on my screen, I switched back to the built-in HDMI of AST2500 and the system seems to hang with following output:

Code: [Select]

--== Welcome to Hostboot hostboot-3beba24/hbicore.bin ==--

  3.08320|secure|SecureROM valid - enabling functionality
  8.62232|Booting from SBE side 0 on master proc=00050000
  8.66832|ISTEP  6. 5 - host_init_fsi
  9.20956|ISTEP  6. 6 - host_set_ipl_parms
  9.80358|ISTEP  6. 7 - host_discover_targets
 10.45804|HWAS|PRESENT> DIMM[03]=8080000000000000
 10.45805|HWAS|PRESENT> Proc[05]=8000000000000000
 10.45806|HWAS|PRESENT> Core[07]=5055500000000000
 10.76196|ISTEP  6. 8 - host_update_master_tpm
 10.83124|SECURE|Security Access Bit> 0x0000000000000000
 10.83125|SECURE|Secure Mode Disable (via Jumper)> 0x8000000000000000
 10.86796|ISTEP  6. 9 - host_gard
 11.33699|HWAS|Deconfig HUID 0x00030000, Physical:/Sys0/Node0/DIMM0
 11.33711|HWAS|FUNCTIONAL> DIMM[03]=0080000000000000
 11.33712|HWAS|FUNCTIONAL> Proc[05]=8000000000000000
 11.33714|HWAS|FUNCTIONAL> Core[07]=5055500000000000
 11.33914|ISTEP  6.11 - host_start_occ_xstop_handler
 12.86084|ISTEP  6.12 - host_voltage_config
 13.01363|ISTEP  7. 1 - mss_attr_cleanup
 14.48736|ISTEP  7. 2 - mss_volt
 14.84739|ISTEP  7. 3 - mss_freq
 15.53796|ISTEP  7. 4 - mss_eff_config
 16.81043|ISTEP  7. 5 - mss_attr_update
 16.84049|ISTEP  8. 1 - host_slave_sbe_config
 16.94450|ISTEP  8. 2 - host_setup_sbe
 16.94554|ISTEP  8. 3 - host_cbs_start
 16.94665|ISTEP  8. 4 - proc_check_slave_sbe_seeprom_complete
 16.95431|ISTEP  8. 5 - host_attnlisten_proc
 16.95527|ISTEP  8. 6 - host_p9_fbc_eff_config
 16.96162|ISTEP  8. 7 - host_p9_eff_config_links
 17.03091|ISTEP  8. 8 - proc_attr_update
 17.03201|ISTEP  8. 9 - proc_chiplet_fabric_scominit
 17.06735|ISTEP  8.10 - proc_xbus_scominit
 17.10310|ISTEP  8.11 - proc_xbus_enable_ridi
 17.12720|ISTEP  8.12 - host_set_voltages
 17.14691|ISTEP  9. 1 - fabric_erepair
 17.35688|ISTEP  9. 2 - fabric_io_dccal
 17.37554|ISTEP  9. 3 - fabric_pre_trainadv
 17.38003|ISTEP  9. 4 - fabric_io_run_training
 17.38356|ISTEP  9. 5 - fabric_post_trainadv
 17.38559|ISTEP  9. 6 - proc_smp_link_layer
 17.39132|ISTEP  9. 7 - proc_fab_iovalid
 17.84717|ISTEP  9. 8 - host_fbc_eff_config_aggregate
 17.86589|ISTEP 10. 1 - proc_build_smp
 18.32489|ISTEP 10. 2 - host_slave_sbe_update
 20.82944|ISTEP 10. 4 - proc_cen_ref_clk_enable
 20.96002|ISTEP 10. 5 - proc_enable_osclite
 20.96099|ISTEP 10. 6 - proc_chiplet_scominit
 21.12679|ISTEP 10. 7 - proc_abus_scominit
 21.14613|ISTEP 10. 8 - proc_obus_scominit
 21.14745|ISTEP 10. 9 - proc_npu_scominit
 21.16494|ISTEP 10.10 - proc_pcie_scominit
 21.22242|ISTEP 10.11 - proc_scomoverride_chiplets
 21.22526|ISTEP 10.12 - proc_chiplet_enable_ridi
 21.24276|ISTEP 10.13 - host_rng_bist
 21.27032|ISTEP 10.14 - host_update_redundant_tpm
 21.27243|ISTEP 11. 1 - host_prd_hwreconfig
 21.87940|ISTEP 11. 2 - cen_tp_chiplet_init1
 21.88167|ISTEP 11. 3 - cen_pll_initf
 21.88472|ISTEP 11. 4 - cen_pll_setup
 21.90654|ISTEP 11. 5 - cen_tp_chiplet_init2
 21.90887|ISTEP 11. 6 - cen_tp_arrayinit
 21.91180|ISTEP 11. 7 - cen_tp_chiplet_init3
 21.91599|ISTEP 11. 8 - cen_chiplet_init
 21.91904|ISTEP 11. 9 - cen_arrayinit
 21.92274|ISTEP 11.10 - cen_initf
 21.92493|ISTEP 11.11 - cen_do_manual_inits
 21.92722|ISTEP 11.12 - cen_startclocks
 21.93014|ISTEP 11.13 - cen_scominits
 21.93381|ISTEP 12. 1 - mss_getecid
 23.07910|ISTEP 12. 2 - dmi_attr_update
 23.11676|ISTEP 12. 3 - proc_dmi_scominit
 23.16648|ISTEP 12. 4 - cen_dmi_scominit
 23.17511|ISTEP 12. 5 - dmi_erepair
 23.19312|ISTEP 12. 6 - dmi_io_dccal
 23.19612|ISTEP 12. 7 - dmi_pre_trainadv
 23.19915|ISTEP 12. 8 - dmi_io_run_training
 23.21495|ISTEP 12. 9 - dmi_post_trainadv
 23.21729|ISTEP 12.10 - proc_cen_framelock
 23.22026|ISTEP 12.11 - host_startprd_dmi
 23.22243|ISTEP 12.12 - host_attnlisten_memb
 23.22604|ISTEP 12.13 - cen_set_inband_addr
 23.24306|ISTEP 13. 1 - host_disable_memvolt
 24.17510|ISTEP 13. 2 - mem_pll_reset
 24.24792|ISTEP 13. 3 - mem_pll_initf
 24.30519|ISTEP 13. 4 - mem_pll_setup
 24.33331|ISTEP 13. 6 - mem_startclocks
 24.34941|ISTEP 13. 7 - host_enable_memvolt
 24.35151|ISTEP 13. 8 - mss_scominit
 25.70075|ISTEP 13. 9 - mss_ddr_phy_reset
 26.14936|ISTEP 13.10 - mss_draminit
 26.61721|ISTEP 13.11 - mss_draminit_training
 27.51642|ISTEP 13.12 - mss_draminit_trainadv
 27.61042|ISTEP 13.13 - mss_draminit_mc
 27.78375|ISTEP 14. 1 - mss_memdiag
 31.58001|ISTEP 14. 2 - mss_thermal_init
 31.64733|ISTEP 14. 3 - proc_pcie_config
 31.71197|ISTEP 14. 4 - mss_power_cleanup
 31.71609|ISTEP 14. 5 - proc_setup_bars
 31.77851|ISTEP 14. 6 - proc_htm_setup
 31.79344|ISTEP 14. 7 - proc_exit_cache_contained
 31.85528|ISTEP 15. 1 - host_build_stop_image
 35.09151|ISTEP 15. 2 - proc_set_pba_homer_bar
 35.15084|ISTEP 15. 3 - host_establish_ex_chiplet
 35.16463|ISTEP 15. 4 - host_start_stop_engine
 35.39656|ISTEP 16. 1 - host_activate_master
 36.68418|ISTEP 16. 2 - host_activate_slave_cores
 36.77981|ISTEP 16. 3 - host_secure_rng
 36.80049|ISTEP 16. 4 - mss_scrub
 36.83218|ISTEP 16. 5 - host_load_io_ppe
 36.87857|ISTEP 16. 6 - host_ipl_complete
 37.75469|ISTEP 18.11 - proc_tod_setup
 38.02326|ISTEP 18.12 - proc_tod_init
 38.05033|ISTEP 20. 1 - host_load_payload
 39.03394|ISTEP 20. 2 - host_load_hdat
 40.11956|ISTEP 21. 1 - host_runtime_setup
 46.40398|htmgt|OCCs are now running in ACTIVE state
 52.37718|ISTEP 21. 2 - host_verify_hdat
 52.41944|ISTEP 21. 3 - host_start_payload
[   53.303670341,5] OPAL skiboot-c81f9d6 starting...
[   53.303673446,7] initial console log level: memory 7, driver 5
[   53.303675558,6] CPU: P9 generation processor (max 4 threads/core)
[   53.303677518,7] CPU: Boot CPU PIR is 0x0024 PVR is 0x004e1203
[   53.303680283,7] OPAL table: 0x30103930 .. 0x30103f10, branch table: 0x30002000
[   53.303683401,7] Assigning physical memory map table for nimbus
[   53.303686056,7] Parsing HDAT...
[   53.303687465,7] SPIRA-S found.
[   53.303689697,6] BMC #0: HW version 3, SW version 2, chip DD1.0
[   53.303770751,6] SP Family is ibm,ast2500,openbmc
[   53.303776925,7] LPC: IOPATH chip id = 0
[   53.303778302,7] LPC: FW BAR       = f0000000
[   53.303779833,7] LPC: MEM BAR      = e0000000
[   53.303781399,7] LPC: IO BAR       = d0010000
[   53.303782895,7] LPC: Internal BAR = c0012000
[   53.303795512,7] LPC UART: base addr = 3f8 (3f8) size = 1 clk = 1843200, baud = 115200
[   53.303798310,7] LPC: BT [0, 0] sms_int: 0, bmc_int: 0
[   53.305153464,5] HDAT I2C: found e3p0 - unknown@18 dp:ff (ff:)
[   53.305273899,5] HDAT I2C: found e3p1 - unknown@1c dp:ff (ff:)
[   53.306035877,5] CHIP: Chip ID 0000 type: P9N DD2.30
[   53.306474802,5] PLAT: Detected Blackbird platform
[   53.306544669,5] PLAT: Detected BMC platform ast2500:openbmc
[   53.323024841,5] CPU: All 32 processors called in...
[   53.501903768,7] LPC: Routing irq 10, policy: 0 (r=1)
[   53.501904733,7] LPC: SerIRQ 10 using route 0 targetted at OPAL
[   54.509575320,5] HIOMAP: Negotiated hiomap protocol v2
[   54.510806979,5] HIOMAP: Block size is 64KiB
[   54.510832611,5] HIOMAP: BMC suggested flash timeout of 8s
[   54.510876435,5] HIOMAP: Flash size is 64MiB
[   54.510970596,5] HIOMAP: Erase granule size is 64KiB
[   56.418150405,5] FLASH: Found system flash: (unnamed) id:0
[   57.207119491,7] LPC: Routing irq 4, policy: 0 (r=1)
[   57.207120295,7] LPC: SerIRQ 4 using route 1 targetted at OPAL
[   57.207242358,5] OCC: All Chip Rdy after 0 ms
[   58.009544728,3] STB: VERSION verification FAILED. log=0xffffffffffff8160
[   59.124974141,3] STB: IMA_CATALOG verification FAILED. log=0xffffffffffff8160
[   59.320998010,3] CAPP: Error loading ucode lid. index=203d1
[   59.335020541,5] PCI: Resetting PHBs and training links...
[   60.355590956,5] PCI: Probing slots...
[   60.412005477,5] PCI Summary:
[   60.412048918,5] PHB#0000:00:00.0 [ROOT] 1014 04c1 R:00 C:060400 B:01..03 SLOT=CPU1 Slot2 (16x)
[   60.412163589,5] PHB#0000:01:00.0 [SWUP] 1022 1470 R:c1 C:060400 B:02..03 LOC_CODE=CPU1 Slot2 (16x)
[   60.412317704,5] PHB#0000:02:00.0 [SWDN] 1022 1471 R:00 C:060400 B:03..03
[   60.412419910,5] PHB#0000:03:00.0 [LGCY] 1002 687f R:c1 C:030000 (           vga) LOC_CODE=CPU1 Slot2 (16x)
[   60.412569858,5] PHB#0000:03:00.1 [EP  ] 1002 aaf8 R:00 C:040300 (multimedia-device) LOC_CODE=CPU1 Slot2 (16x)
[   60.412755922,5] PHB#0001:00:00.0 [ROOT] 1014 04c1 R:00 C:060400 B:01..01 SLOT=CPU1 Slot1 (8x)
[   60.412866802,5] PHB#0001:01:00.0 [EP  ] 144d a802 R:01 C:010802 (  mass-storage) LOC_CODE=CPU1 Slot1 (8x)
[   60.413042976,5] PHB#0002:00:00.0 [ROOT] 1014 04c1 R:00 C:060400 B:01..01 SLOT=Builtin SATA
[   60.413236298,5] PHB#0002:01:00.0 [LGCY] 1b4b 9235 R:11 C:010601 (          sata) LOC_CODE=Builtin SATA
[   60.413376374,5] PHB#0003:00:00.0 [ROOT] 1014 04c1 R:00 C:060400 B:01..01 SLOT=Builtin USB
[   60.413520796,5] PHB#0003:01:00.0 [EP  ] 104c 8241 R:02 C:0c0330 (      usb-xhci) LOC_CODE=Builtin USB
[   60.413672005,5] PHB#0004:00:00.0 [ROOT] 1014 04c1 R:00 C:060400 B:01..01 SLOT=Builtin Ethernet
[   60.413905142,5] PHB#0004:01:00.0 [EP  ] 14e4 1657 R:01 C:020000 (      ethernet) LOC_CODE=Builtin Ethernet
[   60.414016347,5] PHB#0004:01:00.1 [EP  ] 14e4 1657 R:01 C:020000 (      ethernet) LOC_CODE=Builtin Ethernet
[   60.414222156,5] PHB#0004:01:00.2 [EP  ] 14e4 1657 R:01 C:020000 (      ethernet) LOC_CODE=Builtin Ethernet
[   60.414373675,5] PHB#0005:00:00.0 [ROOT] 1014 04c1 R:00 C:060400 B:01..02 SLOT=BMC
[   60.414454930,5] PHB#0005:01:00.0 [ETOX] 1a03 1150 R:04 C:060400 B:02..02 LOC_CODE=BMC
[   60.414582932,5] PHB#0005:02:00.0 [PCID] 1a03 2000 R:41 C:040000 (         video) LOC_CODE=BMC
[   60.424173661,5] IPMI: Resetting boot count on successful boot
[   60.424270580,5] INIT: Waiting for kernel...
[   73.210357140,3] STB: BOOTKERNEL verification FAILED. log=0xffffffffffff8160
[   73.210954847,5] INIT: 64-bit LE kernel discovered
[   73.358043529,5] INIT: Starting kernel at 0x20011000, fdt at 0x306f65d0 217248 bytes
[   74.469358228,3] LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010080
[   74.469369652,6] IPMI: dropping non severe PEL event
[   74.469419009,7] UART: IRQ functional !
[    4.135656] IMC PMU (null) Register failed
[    4.995288] kAFS: failed to register: -97
[    5.393954] squashfs: SQUASHFS error: Xattrs in filesystem, these will be ignored
[    5.393979] squashfs: SQUASHFS error: unable to read xattr id index table
[    5.401894] udevd[1677]: specified group 'kvm' unknown
[    5.410641] udevd[1678]: specified group 'kvm' unknown
nvram process returned non-zero exit status
dmesg: klogctl: Operation not permitted
[   81.461400396,3] PHB#0000[0:0]:  phbRegbFirstErrorStatus = 0000000000000000
[   81.461461441,3] PHB#0000[0:0]:         phbRegbErrorLog0 = 0000000000000000
[   81.461522427,3] PHB#0000[0:0]:         phbRegbErrorLog1 = 0000000000000000
[   81.461585112,3] PHB#0000[0:0]:                PEST[1ff] = 3740002a03000000 0000000000000000
cpu 0x0: Vector: 300 (Data Access) at [c0000001f96df950]
    pc: c0080000022312fc: amdgpu_fence_process+0xc0/0x13c [amdgpu]
    lr: c0080000022312c0: amdgpu_fence_process+0x84/0x13c [amdgpu]
    sp: c0000001f96dfbd0
   msr: 900000000280b033
   dar: 8
 dsisr: 80000
  current = 0xc0000001f95b5900
  paca    = 0xc0000001ff7ff480 irqmask: 0x03 irq_happened: 0x01
    pid   = 1798, comm = kworker/0:4
Linux version 4.19.0-openpower1 (root@raptor-build-public-staging-01) (gcc version 6.5.0 (Buildroot 2019.02.1-05273-gef2bf42027)) #2 SMP Wed May 22 00:16:10 UTC 2019
enter ? for help
[c0000001f96dfc20] c008000002231640 amdgpu_fence_count_emitted+0x20/0x40 [amdgpu]
[c0000001f96dfc50] c0080000022d8fb4 amdgpu_uvd_idle_work_handler+0x90/0x160 [amdgpu]
[c0000001f96dfcb0] c0000000000943f8 process_one_work+0x204/0x32c
[c0000001f96dfd40] c000000000094af0 worker_thread+0x2d0/0x394
[c0000001f96dfdc0] c00000000009a780 kthread+0x14c/0x154
[c0000001f96dfe30] c00000000000b6b0 ret_from_kernel_thread+0x5c/0x6c
The full kernel log can be found at https://gist.github.com/runlevel5/89f87c2296f0f82f634921248309e7be
and the full OPAL log can be found at https://gist.github.com/runlevel5/94b44fa48cae84ffcb7d2f15fe4945a7



Just wondering firmware is loaded correctly or not, is there anything I could do determine the root cause?

137

User Zone / Is it okay to hard shutdown with disconnecting power source at Petitboot screen?

« on: February 02, 2020, 10:24:28 am »

I usually drop into skiroot by selecting Exit to shell option in Pettitboot menu then shutdown with `halt`command. Wondering if hard shutdown by disconnecting power source is just as good?

138

General Discussion / [Guide] How to install TP-LINK TL-WN725N V2 Wifi dongle on Fedora 32

« on: February 02, 2020, 10:04:58 am »

Well this reliable TP-LINK TL-WN725N V2 Wifi dongle aren't working out of the box on Fedora 32 (rawhide). However it is simple enough to find and install driver:

NOTE: There is issue with the `Makefile`, I have lodge a patch at https://github.com/lwfinger/rtl8188eu/pull/311, let's hope this Pull Request get merged soon.

Code: [Select]

$ uname -ar
Linux orion.dev 5.4.15-200.fc31.ppc64le #1 SMP Tue Jan 28 08:53:13 UTC 2020 ppc64le ppc64le ppc64le GNU/Linux

$ lsusb
Bus 001 Device 003: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter

$ sudo dnf groupinstall "Development Tools" "Development Libraries"
$ cd /tmp
$ sudo dnf install kernel-devel
$ git clone https://github.com/lwfinger/rtl8188eu.git
$ cd rtl8188eu
$ make
$ sudo make install
$ sudo depmod -a
$ sudo dracut -c -f -force
$ sudo modprobe 8188eu
$ modinfo 8188eu

filename:       /lib/modules/5.4.15-200.fc31.ppc64le/kernel/drivers/net/wireless/8188eu.ko
version:        v4.1.4_6773.20130222
author:         Realtek Semiconductor Corp.
description:    Realtek Wireless Lan Driver
license:        GPL
srcversion:     762D07FBEAF35B1366430A8
alias:          usb:v2357p0111d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v2357p010Cd*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v056Ep4008d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v2001p331Bd*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v2001p3311d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v2001p3310d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v2001p330Fd*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0DF6p0076d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v07B8p8179d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0BDAp0179d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0BDAp8179d*dc*dsc*dp*ic*isc*ip*in*
depends:
name:           8188eu
vermagic:       5.4.15-200.fc31.ppc64le SMP mod_unload mprofile-kernel relocatable
parm:           rtw_ips_mode:The default IPS mode (int)
parm:           ifname:The default name to allocate for first interface (charp)
parm:           if2name:The default name to allocate for second interface (charp)
parm:           rtw_initmac:charp
parm:           rtw_channel_plan:int
parm:           rtw_chip_version:int
parm:           rtw_rfintfs:int
parm:           rtw_lbkmode:int
parm:           rtw_network_mode:int
parm:           rtw_channel:int
parm:           rtw_mp_mode:int
parm:           rtw_wmm_enable:int
parm:           rtw_vrtl_carrier_sense:int
parm:           rtw_vcs_type:int
parm:           rtw_busy_thresh:int
parm:           rtw_led_enable:int
parm:           rtw_ht_enable:int
parm:           rtw_cbw40_enable:int
parm:           rtw_ampdu_enable:int
parm:           rtw_rx_stbc:int
parm:           rtw_ampdu_amsdu:int
parm:           rtw_lowrate_two_xmit:int
parm:           rtw_rf_config:int
parm:           rtw_power_mgnt:int
parm:           rtw_smart_ps:int
parm:           rtw_low_power:int
parm:           rtw_wifi_spec:int
parm:           rtw_antdiv_cfg:int
parm:           rtw_antdiv_type:int
parm:           rtw_enusbss:int
parm:           rtw_hwpdn_mode:int
parm:           rtw_hwpwrp_detect:int
parm:           rtw_hw_wps_pbc:int
parm:           rtw_max_roaming_times:The max roaming times to try (uint)
parm:           rtw_fw_iol:FW IOL (int)
parm:           rtw_mc2u_disable:int
parm:           rtw_80211d:Enable 802.11d mechanism (int)
parm:           rtw_notch_filter:0:Disable, 1:Enable, 2:Enable only for P2P (uint)
parm:           debug:Set debug level (1-9) (default 1) (int)

# Fix SSID scanning
# Ref: https://gitlab.freedesktop.org/NetworkManager/NetworkManager/issues/158
$ cat > /etc/NetworkManager/conf.d/80-wifi.conf <<EOF
[device]
wifi.scan-rand-mac-address=no
EOF
$ systemctl restart NetworkManager

$ nmcli device
DEVICE      TYPE      STATE         CONNECTION
wlP3p1s0u2  wifi      disconnected  --
That's pretty much the gist. Keep on rocking folks.

139

General Discussion / ASUS Hyper M.2 PCI-e X16 V2 Expansion Card and Support for RAID on CPU

« on: February 02, 2020, 08:15:56 am »

I am doing homework for a PCI-e 4.0 X16 card to host many M.2 NVMe SSD in RAID config for my Blackbird /w POWER9 V2 8-core box.

I learn that the ASUS Hyper M.2 PCI-e X16 V2 Expansion Card is one popular choice amongst AMD Ryzen Threadripper platform.

I would like to ask if the Blackbird offers the similar RAID on CPU support? Is there any pro-sumer/enterprise product that offer PCIe 4.0 NVMe SSDs RAID?

140

Blackbird / The download location for factory default BOOTKERNFW

« on: February 02, 2020, 05:36:02 am »

I would like to ask where I could download the stock BOOTKERNFW that comes bundled with my Blackbird?

Kind regards

141

Applications and Porting / [DEV] asdf support for ppc64le status

« on: January 27, 2020, 05:04:24 pm »

Hi all

I am in the process to migrate to the Blackbird box I've just built. There are plenty of dev softwares that aren't running yet on Linux ppc64le. Slowly I think we will get there...

Anyway, if you are using `asdf`, I would like to report that following language installed successfully:

* ruby
* erlang
* elixir
* nodejs

Other languages that are used to have issues:

* golang (now supported after the merger of ppc64le support)
* rust (now support after the merger of ppc64le support)

So far so good