Raptor Computing Systems Community Forums (BETA)
Software => Firmware => Topic started by: Borley on July 04, 2020, 04:36:43 pm
-
I'm still trying to wrap my head around the 1.00 > 2.00 firmware update procedure.
It looks like the files need to be sent from another computer. Can this be done simply by wiring ethernet ports 0 or 1 directly to the BMC ethernet port?
I would rather avoid having to trust another computer in the process, if at all possible.
-
I guess you could loop it back with the Ethernet ports, but I think a less technically disgusting way would be a USB serial port connected to the BMC headers on the board, and upload things via serial.
-
Some reading up (https://wiki.raptorcs.com/wiki/Troubleshooting/BMC_Connection_Guide) would have clarified this:
Note that you cannot access the BMC in any way from the host system over network -- the NCSI interface has no support for this, and all access including pings will fail.
Anyway, I have gotten it upgraded a few months ago, the proper way.