1
Firmware / Re: Firmware 2.10 for Talos-II and Blackbird available
« on: February 28, 2024, 11:03:17 am »
When I built the firmware (prior to this release) I used an ubuntu 18.04 VM.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
sorry to necro this thread, but where did you get those heatsinks from @cy384? I plan on trying a 16 core cpu in my blackbird and those heatsinks look like they'd work pretty well with my fan setup
nvme-pci-0100
Adapter: PCI adapter
Composite: +39.9°C (low = -273.1°C, high = +76.8°C)
(crit = +79.8°C)
Sensor 1: +39.9°C (low = -273.1°C, high = +65261.8°C)
ibmpowernv-isa-0000
Adapter: ISA adapter
Chip 0 Vdd Remote Sense: 683.00 mV (lowest = +0.67 V, highest = +1.01 V)
Chip 0 Vdn Remote Sense: 674.00 mV (lowest = +0.67 V, highest = +0.67 V)
Chip 0 Vdd: 685.00 mV (lowest = +0.68 V, highest = +1.02 V)
Chip 0 Vdn: 675.00 mV (lowest = +0.68 V, highest = +0.68 V)
Chip 0 Core 0: +44.0°C (lowest = +22.0°C, highest = +65.0°C)
Chip 0 Core 4: +44.0°C (lowest = +22.0°C, highest = +65.0°C)
Chip 0 Core 8: +44.0°C (lowest = +23.0°C, highest = +65.0°C)
Chip 0 Core 12: +44.0°C (lowest = +23.0°C, highest = +65.0°C)
Chip 0 Core 16: +45.0°C (lowest = +21.0°C, highest = +65.0°C)
Chip 0 Core 20: +45.0°C (lowest = +23.0°C, highest = +67.0°C)
Chip 0 Core 24: +45.0°C (lowest = +23.0°C, highest = +66.0°C)
Chip 0 Core 28: +44.0°C (lowest = +24.0°C, highest = +68.0°C)
Chip 0 Core 32: +44.0°C (lowest = +22.0°C, highest = +67.0°C)
Chip 0 Core 36: +44.0°C (lowest = +22.0°C, highest = +67.0°C)
Chip 0 Core 40: +44.0°C (lowest = +22.0°C, highest = +66.0°C)
Chip 0 Core 44: +44.0°C (lowest = +22.0°C, highest = +67.0°C)
Chip 0 Core 48: +45.0°C (lowest = +23.0°C, highest = +66.0°C)
Chip 0 Core 52: +45.0°C (lowest = +23.0°C, highest = +67.0°C)
Chip 0 Core 56: +45.0°C (lowest = +23.0°C, highest = +68.0°C)
Chip 0 Core 60: +45.0°C (lowest = +24.0°C, highest = +68.0°C)
Chip 0 DIMM 0 : +49.0°C (lowest = +30.0°C, highest = +51.0°C)
Chip 0 DIMM 1 : +0.0°C (lowest = +0.0°C, highest = +0.0°C)
Chip 0 DIMM 2 : +0.0°C (lowest = +0.0°C, highest = +0.0°C)
Chip 0 DIMM 3 : +0.0°C (lowest = +0.0°C, highest = +0.0°C)
Chip 0 DIMM 4 : +0.0°C (lowest = +0.0°C, highest = +0.0°C)
Chip 0 DIMM 5 : +0.0°C (lowest = +0.0°C, highest = +0.0°C)
Chip 0 DIMM 6 : +0.0°C (lowest = +0.0°C, highest = +0.0°C)
Chip 0 DIMM 7 : +0.0°C (lowest = +0.0°C, highest = +0.0°C)
Chip 0 DIMM 8 : +0.0°C (lowest = +0.0°C, highest = +0.0°C)
Chip 0 DIMM 9 : +0.0°C (lowest = +0.0°C, highest = +0.0°C)
Chip 0 DIMM 10 : +0.0°C (lowest = +0.0°C, highest = +0.0°C)
Chip 0 DIMM 11 : +0.0°C (lowest = +0.0°C, highest = +0.0°C)
Chip 0 DIMM 12 : +50.0°C (lowest = +30.0°C, highest = +53.0°C)
Chip 0 DIMM 13 : +0.0°C (lowest = +0.0°C, highest = +0.0°C)
Chip 0 DIMM 14 : +0.0°C (lowest = +0.0°C, highest = +0.0°C)
Chip 0 DIMM 15 : +0.0°C (lowest = +0.0°C, highest = +0.0°C)
Chip 0 Nest: +45.0°C (lowest = +23.0°C, highest = +63.0°C)
Chip 0 VRM VDD: +53.0°C (lowest = +35.0°C, highest = +90.0°C)
Chip 0 : 32.00 W (lowest = 28.00 W, highest = 156.00 W)
Chip 0 Vdd: 4.00 W (lowest = 2.00 W, highest = 127.00 W)
Chip 0 Vdn: 9.00 W (lowest = 7.00 W, highest = 11.00 W)
Chip 0 : 326.27 kJ
Chip 0 Vdd: 47.31 kJ
Chip 0 Vdn: 89.58 kJ
Chip 0 Vdd: 6.38 A (lowest = +4.00 A, highest = +129.75 A)
Chip 0 Vdn: 14.38 A (lowest = +11.50 A, highest = +17.38 A)
Can you read out the processor frequencies and tell if it is boosting properly? Do you see ~160W when at idle? What about when running max threads off some heavy workload (e.g. Mersenne primes is a good one)?
4.94593|================================================
4.96605|Error reported by fapi2 (0x3300) EID 0x90000566
4.98696| No WOF table match found
4.98697| ModuleId 0x10 fapi2::MOD_FAPI2_PLAT_PARSE_WOF_TABLES
4.98698| ReasonCode 0x332d fapi2::RC_WOF_TABLE_NOT_FOUND
4.98699| UserData1 Number of cores : 0x00100002000000a0
4.98700| UserData2 WOF Power Mode (1=Nominal, 2=Turbo) : 0x000009c400000012
4.98700|------------------------------------------------
4.98701| Callout type : Procedure Callout
4.98702| Procedure : EPUB_PRC_HB_CODE
4.98702| Priority : SRCI_PRIORITY_HIGH
4.98703|------------------------------------------------
4.98704| Callout type : Hardware Callout
4.98705| Target : Physical:/Sys0/Node0/Proc0
4.98706| Deconfig State : NO_DECONFIG
4.98706| GARD Error Type : GARD_NULL
4.98707| Priority : SRCI_PRIORITY_MED
4.98707|------------------------------------------------
ERROR: PnorUtils::checkSpaceConstraints: Image provided (/home/cy384/blackbird-op-build/output/host/powerpc64le-buildroot-linux-gnu/sysroot/openpower_pnor_scratch//wofdata.bin.ecc) has size (6285312) which is greater than allocated space (3145728) for section=WOFDATA. Aborting! at /home/cy384/blackbird-op-build/output/host/powerpc64le-buildroot-linux-gnu/sysroot/hostboot_build_images/PnorUtils.pm line 462.