Messages

46

Operating Systems and Porting / Can't get vulkan working on opensuse leap 15.4

« on: February 01, 2023, 01:45:00 pm »

EDIT: nevermind, there aren't vulkan drivers for openSUSE ppc64le



The library is installed, it worked perfectly under x86. however any applications with a vulkan renderer just crash, basically saying there isn't vulkan available.

===========
VULKAN INFO
===========

Vulkan API Version: 1.0.65

ERROR: [Loader Message] Code 0 : libVkICD_mock_icd.so: cannot open shared object file: No such file or directory
Cannot create Vulkan instance.
/home/abuild/rpmbuild/BUILD/Vulkan-LoaderAndValidationLayers-1.0.65.0/demos/vulkaninfo.c:808: failed with VK_ERROR_INCOMPATIBLE_DRIVER

47

Blackbird / Re: Onboard nic not working

« on: January 31, 2023, 10:16:07 pm »

this is what i get

48

GPU Compute / Accelerators / Re: Necessary firmware for Navi14

« on: January 31, 2023, 06:11:59 pm »

update: got it to work, had to do the xorg conf file in mentioned in the previous page.

49

General Discussion / 3.5 mic and dac/amp don't work under opensuse leap

« on: January 30, 2023, 07:55:53 pm »

so i have a fiio k5 pro and a typical microphone that worked just fine under opensuse tumbleweed and fedora 37, however they don't work under opensuse leap 15.4 at all (they work under leap15.4 amd64 just fine)

any guesses to where i can start? dmesg shows them showing up just fine.

50

Blackbird / Re: Onboard nic not working

« on: January 30, 2023, 07:11:10 pm »

https://i.imgur.com/mCPsi14.png

this is what i could find with lspci, the listed device name you gave didn't work with ethtool.

51

GPU Compute / Accelerators / Re: Necessary firmware for Navi14

« on: January 30, 2023, 07:03:21 pm »

I dont have a jumper on hand atm unless i want to pull one off the board which im not going to do. This is what i got when i tried running startx under leap.

I went back to leap after i determined it wasn't a distro specific issue.

worse case scenario, i can flash amd firmware and use the jumper, correct? Would've really preferred not to do that but i'm at a loss at this point

52

GPU Compute / Accelerators / Re: Necessary firmware for Navi14

« on: January 30, 2023, 06:29:19 pm »

If i'm unable to get the gpu to work via this method would i be able to use a jumper on the AST and have the gpu function without flashing firmware?

53

GPU Compute / Accelerators / Re: Necessary firmware for Navi14

« on: January 30, 2023, 04:39:26 pm »

I tried that, also tried without an hdmi connected at all and i'd get a blank black screen when the system would switch to DP outpout.

54

GPU Compute / Accelerators / Re: Necessary firmware for Navi14

« on: January 30, 2023, 12:21:16 pm »

well, i installed fedora 37, and i'm still getting the same-ish issue of it just hanging at boot. not sure if its my gpu (amd vega 64) or theres something i'm messing up, but i add those commands and update grub so I'm not sure.

55

Blackbird / Re: Onboard nic not working

« on: January 30, 2023, 09:10:20 am »

ive only seen the broadcom come up during OS install with the listed drives tge3, but it didn't show up at all with fwupmgr. i'll try ethtool

56

GPU Compute / Accelerators / Re: Necessary firmware for Navi14

« on: January 29, 2023, 09:41:31 pm »

what i can find..

57

GPU Compute / Accelerators / Re: Necessary firmware for Navi14

« on: January 29, 2023, 09:32:04 pm »

so it looks like the X display manager fails to start

58

Firmware / reset/clear petitboot password?

« on: January 29, 2023, 07:02:45 pm »

I set a system password but now I can't boot into any OS and it doesnt appear to work on anything other than the shell terminal

59

Blackbird / Re: Onboard nic not working

« on: January 29, 2023, 06:16:21 pm »

fwupdmgr doesnt appear to list the onboard NICs. I see them mentioned during boot however..

the motherboard rev is 1.01

60

Blackbird / Re: Onboard nic not working

« on: January 29, 2023, 03:39:48 pm »

i tried the two dual ethernet ports, not the BMC port. they show as detected upon bootup. i dont know what the firmware is but it should be recent as this was a board from the latest shipment. I haven't attempted any BMC access as i do not have a crossover cable currently.