Software > User Zone

Graphics Card install

<< < (20/28) > >>

MauryG5:
Guys I rectify my last message, I'm checking the command line that MPC said was different, actually it was copied exactly, only on the forum did it come up with spaces. Such as. you can see the sequence is correct and when I do the cp command, it returns this error to me ... Merklot you have to intervene and let me kindly understand what is happening because I have copied everything as it is done on the guide, it worked everything up to here, now it is strange that from this error ...

MPC7500:
@meklort: ATM I'm on Fedora 30.

After: make oldconfig I get:

--- Code: ---HOSTCC  scripts/basic/fixdep
  HOSTCC  scripts/kconfig/conf.o
  HOSTCC  scripts/kconfig/confdata.o
  HOSTCC  scripts/kconfig/expr.o
  LEX     scripts/kconfig/lexer.lex.c
  YACC    scripts/kconfig/parser.tab.[ch]
  HOSTCC  scripts/kconfig/lexer.lex.o
  HOSTCC  scripts/kconfig/parser.tab.o
  HOSTCC  scripts/kconfig/preprocess.o
  HOSTCC  scripts/kconfig/symbol.o
  HOSTCC  scripts/kconfig/util.o
  HOSTLD  scripts/kconfig/conf
scripts/kconfig/conf  --oldconfig Kconfig
.config:6025:warning: symbol value 'm' invalid for REMOTEPROC
*
* Restart config...
*
*
* Platform support
*
IBM PowerNV (Non-Virtualized) platform support (PPC_POWERNV) [Y/n/?] y
  OPAL PRD driver (OPAL_PRD) [M/n/y/?] m
  Enable removal of RAM from kernel mappings for tracing (PPC_MEMTRACE) [N/y/?] n
  IBM Virtual Accelerator Switchboard (VAS) (PPC_VAS) [Y/n/?] y
Expose SCOM controllers via debugfs (SCOM_DEBUGFS) [Y/n/?] y
IBM pSeries & new (POWER5-based) iSeries (PPC_PSERIES) [Y/n/?] y
  Support for shared-processor logical partitions (PPC_SPLPAR) [Y/n/?] y
    Dispatch Trace Log (DTL) [Y/n/?] y
  pSeries energy management capabilities driver (PSERIES_ENERGY) [M/n/y/?] m
  Scanlog dump interface (SCANLOG) [Y/n/m/?] y
  IO Event Interrupt support (IO_EVENT_IRQ) [Y/n/?] y
  LPAR Configuration Data (LPARCFG) [Y/?] y
  Support for shared-memory logical partitions (PPC_SMLPAR) [Y/n/?] y
    Collaborative memory management (CMM) [Y/n/m/?] y
  Hypervisor supplied PMU events (24x7 & GPCI) (HV_PERF_CTRS) [Y/n/?] y
  Support for the PAPR Storage Class Memory interface (PAPR_SCM) [M/n/?] m
  Secure virtual machine (SVM) support for POWER (PPC_SVM) [N/y/?] (NEW)

--- End code ---

.config:6025:warning: symbol value 'm' invalid for REMOTEPROC

MauryG5:
apparently Meclort has abandoned us now ... guys is there someone else who has done this procedure and knows how to solve our problems?

MPC7500:
In the meantime, could you figure out why the error message pops-up?
Also do you know what this line means?
cp /boot/config-*.ppc64le .config

MauryG5:
from what I read in the guide serves to configure the kernel ... but I don't know specifically ... I only say that having followed the guide step by step I wonder why it gives me such an error ... The only thing that comes to me from to think is that the steps to create the customized Kernel are missing, but I don't know how to do anything else, I don't know what to think ... I have no idea ...

Navigation

[0] Message Index

[#] Next page

[*] Previous page