Software > Firmware

New firmware V2.00 BMC procedure

<< < (2/7) > >>

xilinder:
Yes, I believe so.
Connect one port of the switch to the device that connects to the router and your two computers to other ports on the switch. Works for me.

MauryG5:
Well thank you for your information, now I started to understand how to connect at least both computers to the network, I hadn't really thought about it. I will buy a switch and make this connection in the meantime to see if I can get into the Blackbird. Another thing I wanted to ask you, when you are connected, what is the best method to find the IP address of the Blackbird?

xilinder:
Generally I log into my router and see which IP address is assigned to the mac number.

I also mark that mac number as 'denied' for the internet. That way there is less chance of being hacked. The switch will still allow you to talk to the BB from another computer, but you will not be able to go out on the internet with that RJ45 connection.

I don't have a Blackbird so your mileage may vary.

MauryG5:
well, as soon as I have the switch I immediately try to connect to BB and see the IP address via router. I also wanted to understand if there are currently problems in this update or it can be done without problems. I read the ClassicHas article on Talospace and I was worried about telling the truth, I would not like after problems I have problems due to some bugs ...

MauryG5:
Xlinder, I managed to see the Blackbird door, I put the command to enter but nothing, after a while I get this message and it doesn't even let me enter the password ... What happens?

Navigation

[0] Message Index

[#] Next page

[*] Previous page