Third Party Hardware > GPU Compute / Accelerators

Which .bin files to use

(1/1)

markr87:
For a RX 6600, Navi 23, which .bin files would you add to BOOTKERNFW to get Petitboot on the discrete GPU?

adaptl:
I have no idea, I have the same GPU so if I figure it out I'll get back to you

adaptl:
this page: https://wiki.gentoo.org/wiki/AMDGPU suggests amdgpu/dimgrey_cavefish_{ce,me,mec2,rlc,smc,ta,dmcub,mec,pfp,sdma,sos,vcn}.bin, which i've tried and never gotten to work. Maybe it's because my firmware is out of date. A guy on IRC told me you should just check your petitboot's dmesg (you can still do this over serial if your VGA is disabled with the jumper) and see what firmware files it complains about, which may be more than just the ones strictly necessary for your card.

tle:

--- Quote from: adaptl on February 15, 2025, 08:53:18 pm ---this page: https://wiki.gentoo.org/wiki/AMDGPU suggests amdgpu/dimgrey_cavefish_{ce,me,mec2,rlc,smc,ta,dmcub,mec,pfp,sdma,sos,vcn}.bin, which i've tried and never gotten to work. Maybe it's because my firmware is out of date. A guy on IRC told me you should just check your petitboot's dmesg (you can still do this over serial if your VGA is disabled with the jumper) and see what firmware files it complains about, which may be more than just the ones strictly necessary for your card.

--- End quote ---

It should be the dimney_cavefish. However please note that the BMC runs old Linux version. The known working version is 6.1.0. So you have to compile a custom OpenBMC yourself with newer kernel version... why don't you give that a go?

Navigation

[0] Message Index