Raptor Computing Systems Hardware > Blackbird

The download location for factory default BOOTKERNFW

(1/1)

tle:
I would like to ask where I could download the stock BOOTKERNFW that comes bundled with my Blackbird?

Kind regards

MPC7500:
There is no BOOTKERNFW bundled. Because the systems doesn't come with any OS. You have to download your desired Firmware yourself.
You have to follow this instructions.

Advantage in doing this is to get a screen on Petitboot. Drawback, you have to repeat the procedure after each Blackbird-Firmware update. Fortunately, there is rarely a firmware update.

tle:
Great thanks for pointing that out.  :)

MPC7500:
And there's AFAIK no performance advantage in doing this. If you have a second computer, you could access the Blackbird via ssh:
--- Code: ---ssh root@blackbird -t -p2200
--- End code ---

Then you could see the hostboot coming up like:

--- Code: -----== Welcome to Hostboot hostboot-3beba24/hbicore.bin ==--

  3.05524|secure|SecureROM valid - enabling functionality
  5.88506|Booting from SBE side 0 on master proc=00050000
  5.92409|ISTEP  6. 5 - host_init_fsi
  6.45292|ISTEP  6. 6 - host_set_ipl_parms
  7.01365|ISTEP  6. 7 - host_discover_targets
…

[   58.115693949,5] IPMI: Resetting boot count on successful boot
[   58.115766868,5] INIT: Waiting for kernel...
[   71.203854371,3] STB: BOOTKERNEL verification FAILED. log=0xffffffffffff8160
[   71.204413794,5] INIT: 64-bit LE kernel discovered
[   71.352697029,5] INIT: Starting kernel at 0x20011000, fdt at 0x306f35a0 206892 bytes
[   73.036164478,3] LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010080
[   73.036176803,6] IPMI: dropping non severe PEL event
[   73.036252854,7] UART: IRQ functional !
--- End code ---

And you could also see Petitboot:

Navigation

[0] Message Index